RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Exterior Appearance and Body Kits (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/)
-   -   Fiberglass Fender Vents?? (https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/fiberglass-fender-vents-95044/)

Mugatu 04-11-2008 07:24 PM


Originally Posted by snipaz2420 (Post 2402379)
the adhesive on my clips is starting to come off and the clips are no longer attached to the vent. luckily its only the middle clips so far.

I'm not surprised. He's jimmied his flawed design to try to make it work. It's obviously showing that it's not working. Were you one of the 10 he sold to this past month?

snipaz2420 04-11-2008 07:27 PM

i got them back in january and had them on since early february

fd3s777 04-12-2008 02:57 AM


Originally Posted by snipaz2420 (Post 2402379)
the adhesive on my clips is starting to come off and the clips are no longer attached to the vent. luckily its only the middle clips so far.

I use crazy glude to hold down those fibers. If you need more fiber just use tissue paper mix with crazy glude will hold it strong.

ЯX-8 04-12-2008 03:15 AM

I saw these CF vents on Phil's car tonight and they look great. Fitment is great! I give about a 9 out of 10. I saw a small gap in the center part of the vents..

fd3s777 04-12-2008 04:02 AM


Originally Posted by Mugatu (Post 2402381)
I'm not surprised. He's jimmied his flawed design to try to make it work. It's obviously showing that it's not working. Were you one of the 10 he sold to this past month?

Like I said... new version fits great and all are happy. If you try to work on them they will fit fine.

Chamberlin 04-14-2008 01:25 AM


Originally Posted by fd3s777 (Post 2402859)
Like I said... new version fits great and all are happy. If you try to work on them they will fit fine.


Jay, all the 'working on' stuff is supposed to be done by YOU, the SELLER, *BEFORE* you sell them to US, the BUYERS.

fd3s777 04-28-2008 08:25 AM

1x1 plain waave vents. Rear brackets are pre install. With these brackets, vent are much easier to put on now.
https://img166.imageshack.us/img166/280/cimg0399wf7.jpg
https://img166.imageshack.us/img166/...img0398zf1.jpg

Mugatu 04-28-2008 10:21 AM

did you look past how easily they attach and put the R&D on them to see if they STAY PUT as time goes on? The zip ties appeared to work in the beginning and then a month later they fell apart.

fd3s777 04-28-2008 12:20 PM

I had them on my 8 for over 2 months already. Going to switch to the one with Titanium mash in 1x1 wave this week.

perks11 05-04-2009 10:38 PM

edit: messed up sorry for bumpin a year old thread guys!

fd3s777 05-16-2009 12:08 PM

https://img268.imageshack.us/img268/4826/evorpod021.jpg

Nopstnz8 05-18-2009 12:38 PM


Originally Posted by fd3s777 (Post 3024005)

Those look really good! How durable are these compared to the earlier problematic fiberglass ones? Will the CF hold up and not turn yellow like the Autobahn ones?

M RX 8 03-20-2015 02:21 PM

I know is OLD THREAD and sit down for few years, but want ask about VENTS from www.EVO-R.Net did they ok now? because I'm interested to buy.
Mazda RX 8 RX8 Flat Black Fender Vents SE3P Free Rotary Plush EVO R | eBay

Phil's 8 03-23-2015 09:04 AM


Originally Posted by M RX 8 (Post 4673539)
I know is OLD THREAD and sit down for few years, but want ask about VENTS from EVO-R Performance Motorsports 350Z G37 EVO X RX-8 Hummer H2 RX-7 did they ok now? because I'm interested to buy.
Mazda RX 8 RX8 Flat Black Fender Vents SE3P Free Rotary Plush EVO R | eBay


Yes they are good vents and have lasted on mine for several years

9krpmrx8 03-23-2015 05:36 PM

But good luck with EVO R's customer service, plenty of bad guy threads. What's up Phil?!! Hope you are doing well.

My rotaryFX fender vents just started chipping and cracking, they are with my paint guy as we speak getting refinished. They are several years old though. But a lot of the stuff they sell is cheap crap so I was surprised they held up this long actually.

https://farm4.staticflickr.com/3774/...75eac122_c.jpg
https://farm4.staticflickr.com/3784/...dc2640f0_c.jpg


All times are GMT -5. The time now is 10:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands