hey rotr8 you never got back to me about replicating strakes for my accolade fenders if I made them for one side. I'm also debating doing carbon on the nose to go along with the hood trunk and soon to be roof.
|
1 Attachment(s)
look what showed up today
Attachment 251767 |
ballin'!!!!!
|
Nice, get that painted and installed quick and get that snail running.
|
yeah i would love to im working 12 hour days at a shut down right now. i have the accolade fenders up in the top of the grage that need to go on too
|
I wonder what fog light mount brackets they'll use for the front.....
Looks sick tho.... I like.... |
I'm going to make my own and modify the bumper to keep my crash bar so I can attach the projector hid fogs and intercooler mounts
|
I modded my crash bar to fit my modded AutoExe bumper, There is a lower box frame that can be cut away that doesnt tie into the bars stands, you can reduce the hieght of the box frome in the front by half. Is this safe, dont know, its probably there for a reason(minimal hieght for a crash zone or something) but I figured the meat of the bar was the upper portion.
|
yeah I was looking at Modding both like you say. it was dark and I only looked at it briefly. hey rotr8 how about those strakes I pmed you about on the accolade fenders
|
I only vaguely remember your request. Im not sure what you would like me to do? I especially cant build anything based off pictures. whatever part you would like I would need the part its fitted to to even know where to begin.
I know you sent me a pm a while ago, but I get so many pms like it that I most likely overlooked it. Send me another messege detailing what you would like, and Ill see what I can do. |
2 Attachment(s)
well i gave fitting it a shot today along with the rear bumper.the rear i was able to cut up another bumper to see what i needed to do before i cut mine. no pictures of the rear yet.
Attachment 251691 Attachment 251692 |
Niceee bumblebeerx8!! ^^ Looks pretty evil looking.. I'm gonna be working on Phil's 8 C-West front bumper on Saturday, I can't wait to see it in person and put my custom touch to it. :)
|
What are you going to be doing with Phil's bumper?
|
We will take some pics of what we do..........Mine is still in the box.
|
ah man top secret eh?
ЯX-8, you do body work? |
mine is going for paint tomorrow
|
oh you have to cut the bottom portion of the crash bar trim a 1/2" in and down on that section of the radiator hole. then you have to shave the part that presses in the corner lights. its a bit too thick to press in with ease. other that that its pre drilled holes new tabs forundertray screws. mesh for everything. not any lower than stock bumper with app package.
|
how's the fitment?
(aside from having to modify the crash bar) around the corner lights? where it meets the hood? up against the fender? Just wondering on a scale of 1-10 so people can get an idea of how much work their shop is going to need to put in for that OEM like fitment. |
9-10 before the 2 mods with a rotor zip which took 20 minutes. I'm not even taking the car to the painter.
|
Originally Posted by Phil's 8
(Post 3773499)
We will take some pics of what we do..........Mine is still in the box.
|
I'm the one who talk Phil into it!!!
|
Bumblebee and Phil, have u decided if your putting mesh in the grill or leaving it open?
|
9-10 before the 2 mods with a rotor zip which took 20 minutes. I'm not even taking the car to the painter. all the issues were around the corner lights. the gap between the hood tightened up with this bumper
|
im going to put mesh all all the holes but I have projector fog lights for the small holes by the oil coolers. the mesh is getting painted black and intercooler will be black too. it will be a sleeper
|
Rotr8, my first choice was a bumper that you were going to make (and still may) and then my second choice was an ATH that is impossible to get into this country at any thing like a reasonable price. Then I thought an R-magic might look nice but alas it was not for me. Chunbelievable brought up this one and it did look nice so.............................
I will be adding something to the grill area. Not yet sure if it will be mesh. That is only one of the things that we will be working on. I have three different sets of fog lights/running lights and want one set to mounted into the bumper. I also want to check fitament and be able to tell the body shop the points that may have to be altered. Armin has transformed his 04 into an 09 so he is able to do body work but the final fitament will be left to a body shop so that the paint and lineup are perfect. |
yeah sorry, it was just too big of a project for me at this point. I had all the equipment but no space to do the work, and not that much time between my day job and other contracted work. Hell its taken ShineAuto 5 yrs to build thier FEED repica kit and thats thier business, it will be a while before I acquire a spare garage or something to pull that off.
|
Originally Posted by bumblebeerx8
(Post 3767004)
I'm going to make my own and modify the bumper to keep my crash bar so I can attach the projector hid fogs and intercooler mounts
Originally Posted by bumblebeerx8
(Post 3773553)
oh you have to cut the bottom portion of the crash bar trim a 1/2" in and down on that section of the radiator hole. then you have to shave the part that presses in the corner lights. its a bit too thick to press in with ease. other that that its pre drilled holes new tabs forundertray screws. mesh for everything. not any lower than stock bumper with app package.
|
2 Attachment(s)
no i do not. my bumper is at the painters and should take about a week or so. sorry i described the best i could maybe this will help.
the crash bar was trimed the bottom picture even with the bottom of the main support i took the angle welded piece off and even all the way across the corner lights the material was too thick to slide into the white snap pieces behind the corner lights. last the big main radiation hole was trimed to make up the rest of the clearence to miss the crash bar which was a half inch or so of material in (from the longer lip of the top the part that rolls in is almost perfect.(picture attached of top view near crash bar may be a mirror image i dont recall) and a half to a full inch down. you end up with a long strip with little ears in a u shape. |
I LOVE this kit! I think it'll be mine once I pay off some recent unexpected expenses. :)
|
SO tempted to buy the front bumper of this kit and maybe mix it with the ings sides/rear in the future.
If the fitment is as good as you say it is... I just might give in |
Hay bumblebeerx8 how did you C-West front bumper turn out? I am still working on mine and it looks like it will be closer to 12/1 before I am done enough to have it painted. Damm fog light are giving me a trouble. It would be nice to see how yours turned out.
|
still at the painters. he promised it would be done sometime this week because he got slammed. Is the smaller hole opening big enough to fit the oem fogs? I went to projector hid fog lights for mine. the size is smaller and they fit with room. I have not looked at mounting them yet though
|
Originally Posted by bumblebeerx8
(Post 3786658)
still at the painters. he promised it would be done sometime this week because he got slammed. Is the smaller hole opening big enough to fit the oem fogs? I went to projector hid fog lights for mine. the size is smaller and they fit with room. I have not looked at mounting them yet though
|
yeah im looking at having to make some kind of bracket. i may mount so the stay attached to the car if the bumper comes off just not sure yet. i did get my carbon ms rear put on today but it was too dark for pictures. Also the painter called hestarted my front this afternoon
|
1 Attachment(s)
Attachment 250962just picked up the front bumper today install pics soon
|
looks good man!
|
I can't wait to see it installed BumbleBee!!!
|
Damm, looks good. I should be sending mine in for paint soon. We are still mounting the fogs as the stock ones are my choice. My helper is working on the mounting. We very slow.....I ended having to take more out of the crash bar. Hoping to compete this Saturday for paint and getting the grills powder coated.
|
6 Attachment(s)
here is a quick mount (sorry for cell phone quality and lighting)because i have the fogs to mount and im sure i have to make a custom aluminum underpanel for the intercooler set up
Attachment 250956 Attachment 250957 Attachment 250958 Attachment 250959 Attachment 250960 Attachment 250961 |
It looks great.......I should be joining you in a couple of weeks.
|
i said i woud be the first to have it in the usa back at the end of january. Its been a wait but i am loving the look with the ms carbon rear and the veilside skirts with the carbon accent. just need the carbon roof and accolade fenders. been thinking about the new wedsport rims and do the blue accents yellow but we will see
|
any updates?
|
I believe its just me that is painted and installed(now off to finish some stuff) Phil is close. both of us just have fronts though
|
That looks sweet man....I'll take the drive to see it when the weather is nice. props.
|
yeah and the Turbo is done just have to run the boost controller and connect wires. still have to work on the roof too
|
Originally Posted by bumblebeerx8
(Post 3820084)
I believe its just me that is painted and installed(now off to finish some stuff) Phil is close. both of us just have fronts though
|
so how did yous end up fitting? what fog lights did you end up going with?
|
Originally Posted by bumblebeerx8
(Post 3820713)
so how did yous end up fitting? what fog lights did you end up going with?
|
All times are GMT -5. The time now is 06:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands