will Cobb save my custom ecu tune ?
07-19-2011, 10:36 AM
#26
Team---agreed!
No, what I meant is when Steve comes to town I will get him to do the a/p tune, but ,he also has some experience with Cam's flash's so if there is any problems he will know what to do.
I kinda understand tuning and how the different tables intereact. It reminds me of the body's endocrine system which also has an open/closed loop feedback componet among other things. I am glad this computer/engine/car doesnt have circadian rythms to deal with, but heck maybe it does--I just havent been deep enough
.
Jeff this is the one i bought from member DuBy, who said he bought it from you. You gave him a good bump in his thread, said he was a good guy etc. It did not have any maps on it when it was delivered.
Maybe my Pettit map ( done by Bill on site) has a lock on it?
OD
No, what I meant is when Steve comes to town I will get him to do the a/p tune, but ,he also has some experience with Cam's flash's so if there is any problems he will know what to do.
I kinda understand tuning and how the different tables intereact. It reminds me of the body's endocrine system which also has an open/closed loop feedback componet among other things. I am glad this computer/engine/car doesnt have circadian rythms to deal with, but heck maybe it does--I just havent been deep enough
. Jeff this is the one i bought from member DuBy, who said he bought it from you. You gave him a good bump in his thread, said he was a good guy etc. It did not have any maps on it when it was delivered.
Maybe my Pettit map ( done by Bill on site) has a lock on it?
OD
Last edited by olddragger; 07-19-2011 at 11:01 AM.
07-19-2011, 11:55 AM
#27
Registered
Team---agreed!
No, what I meant is when Steve comes to town I will get him to do the a/p tune, but ,he also has some experience with Cam's flash's so if there is any problems he will know what to do.
I kinda understand tuning and how the different tables intereact. It reminds me of the body's endocrine system which also has an open/closed loop feedback componet among other things. I am glad this computer/engine/car doesnt have circadian rythms to deal with, but heck maybe it does--I just havent been deep enough.
Jeff this is the one i bought from member DuBy, who said he bought it from you. You gave him a good bump in his thread, said he was a good guy etc. It did not have any maps on it when it was delivered.
Maybe my Pettit map ( done by Bill on site) has a lock on it?
OD
No, what I meant is when Steve comes to town I will get him to do the a/p tune, but ,he also has some experience with Cam's flash's so if there is any problems he will know what to do.
I kinda understand tuning and how the different tables intereact. It reminds me of the body's endocrine system which also has an open/closed loop feedback componet among other things. I am glad this computer/engine/car doesnt have circadian rythms to deal with, but heck maybe it does--I just havent been deep enough
. Jeff this is the one i bought from member DuBy, who said he bought it from you. You gave him a good bump in his thread, said he was a good guy etc. It did not have any maps on it when it was delivered.
Maybe my Pettit map ( done by Bill on site) has a lock on it?
OD
If you request a stock Mazda flash from Pettit/EFI-dude, you can than flash to anything from that starting point.
07-19-2011, 02:02 PM
#29
He told me he never installed it and it didnt have any of your maps on it?
It didnt when I installed the manager etc on my home computer? Course now I am not an expert with it and maybe there is something I dont know to look for.?
The race program installed ok and the cobb maps install ok in the unit. It is just when I went to married it-- it would not do it.
Oh-- Ok Rote --what you are saying is that I need to revert back to a stock map via the efi dude 1st? Then it will marry up etc?
It didnt when I installed the manager etc on my home computer? Course now I am not an expert with it and maybe there is something I dont know to look for.?
The race program installed ok and the cobb maps install ok in the unit. It is just when I went to married it-- it would not do it.
Oh-- Ok Rote --what you are saying is that I need to revert back to a stock map via the efi dude 1st? Then it will marry up etc?
07-19-2011, 02:05 PM
#30
Administrator
iTrader: (7)
OD: If the AP was used before (sounds like it per MM), DuBy could easily have just removed any of his custom maps using the AP software on his computer that way he sends it to you 'blank' as if it were new.
As long as he properly uninstalled / un-married it from his vehicle, it should be able to work with yours.
does the AP properly recognize your vehicle? year / type? (Fed , CA, etc)
As long as he properly uninstalled / un-married it from his vehicle, it should be able to work with yours.
does the AP properly recognize your vehicle? year / type? (Fed , CA, etc)
07-19-2011, 05:28 PM
#34
Thanks, never tried to install a married unit to another vehicle and had no idea
and unless you've either taken the MM seminar or gone over it in detail with someone who either works at Cobb or has then you likely don't understand how the tables interact. I've been through it several times and taken the seminar and still don't consider myself an expert. The OE strategy is so complex it will not always do what you expect to make sense.
and unless you've either taken the MM seminar or gone over it in detail with someone who either works at Cobb or has then you likely don't understand how the tables interact. I've been through it several times and taken the seminar and still don't consider myself an expert. The OE strategy is so complex it will not always do what you expect to make sense.
07-20-2011, 08:59 AM
#38
Thank God my car doesnt run on windows7--heck my computer doesnt even like it.
I had some kind of trouble with getting access race to do right.
I still have a map that is "greyed"out.
But anyway--i have started.
Jeff--- I know, I know. But Brett is helping me with it all. Its a slow process. My fault not his.
He has the patience of a saint.
I had some kind of trouble with getting access race to do right.
I still have a map that is "greyed"out.
But anyway--i have started.
Jeff--- I know, I know. But Brett is helping me with it all. Its a slow process. My fault not his.
He has the patience of a saint.
07-20-2011, 12:26 PM
#39
Registered
Thank God my car doesnt run on windows7--heck my computer doesnt even like it.
I had some kind of trouble with getting access race to do right.
I still have a map that is "greyed"out.
But anyway--i have started.
Jeff--- I know, I know. But Brett is helping me with it all. Its a slow process. My fault not his.
He has the patience of a saint.
I had some kind of trouble with getting access race to do right.
I still have a map that is "greyed"out.
But anyway--i have started.
Jeff--- I know, I know. But Brett is helping me with it all. Its a slow process. My fault not his.
He has the patience of a saint.
07-20-2011, 03:20 PM
#41
Hey!!!!
JK
No I wont be doing my on maps at present. No way. Not yet. Maybe some time in the future. Who knows.
I think the greyed out map may be an access tuner match up problem? He is working on it and trying to edumicate me. Bless his heart.
JK
No I wont be doing my on maps at present. No way. Not yet. Maybe some time in the future. Who knows.
I think the greyed out map may be an access tuner match up problem? He is working on it and trying to edumicate me. Bless his heart.
05-07-2013, 06:49 PM
#42
Denny, so the AP saved your Pettit flash. But can u apply that Pettit file at anytime or only when you unmarrie the AP from your car.
Reason for asking: I have a AP, but I want to use it for logging. I have to marry it 1st to the car, but I don't want to loose my Pettit flash.
Reason for asking: I have a AP, but I want to use it for logging. I have to marry it 1st to the car, but I don't want to loose my Pettit flash.
05-08-2013, 04:17 PM
#43
only when you un-marry.
it used to be that you could copy and then flash install with the Harrison flash device. I think they may have since added copy protection, so unless you have one of the older flash software kits that may no longer the case. Not sure.
it used to be that you could copy and then flash install with the Harrison flash device. I think they may have since added copy protection, so unless you have one of the older flash software kits that may no longer the case. Not sure.
Thread
Thread Starter
Forum
Replies
Last Post
Danield97
Series I Trouble Shooting
1
09-30-2015 05:59 PM
