HELP! uninstalled accessport now car stalls.
I was restoring my 04 rx8 with 81k miles back to its factory state but after uninstalling my access port with an MM tune on it, now my 8 stalls when it idles drobbing down below 750 all the way down to zero, have to keep it throttled so the car won't shut off. I recently checked my coils and put in new spark plugs nearly 2 days ago. The car was running smoothly when using the access port. What could this problem be? Any help would be appreciated.
|
I would reinstall the accessport, for now.
|
I have never used one so I cant be sure, but do you have to reset the ECU at all? or DC the battery?
|
Have you tried restarting again? This would be typical since the car is setting the fuel trims. Sometimes it takes a few drive cycles to get normal. Go for a drive, restart again. If it is still stalling then you have other issues.
|
^ Try what he said, as most likely it is the pcm relearning the fuel trims.
Great place to put this thread btw. |
Originally Posted by Stars123
(Post 3789866)
I was restoring my 04 rx8 with 81k miles back to its factory state but after uninstalling my access port with an MM tune on it, now my 8 stalls when it idles drobbing down below 750 all the way down to zero, have to keep it throttled so the car won't shut off. I recently checked my coils and put in new spark plugs nearly 2 days ago. The car was running smoothly when using the access port. What could this problem be? Any help would be appreciated.
|
Originally Posted by paimon.soror
(Post 3790054)
I have never used one so I cant be sure
http://m.youtube.com/watch?v=B9q2jNjOPdk . |
Hey, cant knock on me for just helping out by throwing some ideas out there, its not like i was like "hey do this it will work"
|
All times are GMT -5. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands