Cranking injector pulse width
I think I found a couple tables for setting cranking IPW based on coolant temp:
Code:
Table A There is also a table which acts as a multiplier to these values based on throttle position: Code:
[Throttle Position], [Multiplier] caveats There are other checks against pedal position, throttle, ECT and unknowns, that can disable this enrichment. Also unknown is exactly under what circumstances table A or B will be used, and there are other modifiers to the final value, including some learned parameters, that I don't understand. This is all totally untested. Almost forgot, I looked these up in some other roms for reference: Code:
Series II 2010 MT USDM |
You appear to be making good progress.
|
good stuff . Would be great if you could find cranking coil dwell as well :)
|
I've looked at that a few times, but I still think cranking dwell is set by a single parameter. Not something you'll be able to change with ProTuner as it is.
|
All times are GMT -5. The time now is 11:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands