ISO South Florida Tuner familiar with Motec
03-23-2018, 08:59 PM
#1
ISO South Florida Tuner familiar with Motec
ISO South Florida tuner familiar with Motec that can help sort out wiring and signals between the Motec ECU, the CAN bus and the ABS & PS.
I'm running on Speedsource's old Koni Challenge cars and getting nothing from the PS or the ABS. Traced the wiring and everything seems intact, also getting a signal to and from the CAN bus to all the components. Not sure if the correct signals/data are making it through.
Anyone with experience/background in wiring up these setups that can come by the shop and help us out would be appreciated.
I'm running on Speedsource's old Koni Challenge cars and getting nothing from the PS or the ABS. Traced the wiring and everything seems intact, also getting a signal to and from the CAN bus to all the components. Not sure if the correct signals/data are making it through.
Anyone with experience/background in wiring up these setups that can come by the shop and help us out would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
heyarnold69
NE RX-8 Forum
2
02-17-2009 12:59 AM
Thommino
Series I Interior, Audio, and Electronics
0
08-22-2008 01:46 PM
epitrochoid
SE RX-8 Forum
8
01-24-2006 01:23 PM
