DIY: Side mirror turn signals on the cheap!
 

Hey guys... One thing I've always really liked was turn signals in the side mirrors... and rather than spend the money on something pricy, I thought I would just do it myself. Assuming everyone has electrical tape, some kind of splicing tool, and some wire, this mod will only cost you 15$ at autozone.... now before I go any further.... Don't flame me for buying something at an autopart store... they're really not that bad! Alright to begin... you need to go to Autozone, advanced... wherever... pick you up a pack of the Small LED strip... I think they were 5", but not sure. I used the amber color... but they have white, blue, and red too. You'll need to use this DIY to remove the door panel and mirror and other crap:

http://www.puddlelights.com/manual/puddlelights.pdf

You'll notice they're also showing how to wire in puddle lights.... well pretend the leds you bought are those puddle lights but dont wire them in where they tell you. and here we go:

STEP 1- Remove your front wheels and wheel wells. ( You do not have to remove the bottom front part of the wheel well... just everything from the corner light up and around.

STEP 2- once you have that off. you can look back towards the door through the well and see through where the door is open... you're gonna run your wire through there. Reach up where the headlights are and disconnect the turn signal from its socket (counterclockwise and pull) It has a green and black wire coming from it. you will splice your wires into them. (pics at bottom)

STEP 3- once tapped in, run the wire all the way to the door (itll run behind the fender vents) pull back the rubber seal and run it underneath and into the door panel. now if you follow the directions from the other DIY just use the wire you just ran as your 12v and ground. and thats all there is to it.

This was my first time removing the door panel, and it took me a few hours to do the whole job, as I'm easily frustrated and like to take breaks, so its a small ad simple job, and I really like the outcome!

P.S. the picture doesnt exactly do the lights justice... They're pretty damn bright at night. Scared the crap out of me first time I went to turn:rollingla

Awesome.

Pretty cool indeed. It will be nicer if it's standard on all Mazda lineup. The only auto maker with all their vehicles equipped with side mirror turn signal lights, that would be awesome.

I like it. Looks good.

we need some action shots, and video!

Question, couldn't you just save the trouble of splicing those wires and just run directly to the blinker fuse in the hood fuse box?

pretty cool but dont over do it because if they are too bright they gonna affect your visibility.

Yeah i could have haha. I'm dull when it comes to stuff like that... I always just head for the visible source. The fue box would have been simpler I suppose, but im not the best at making wires disappear. I'll post a vid sometime this evening!

Yeah i'd be worried about glare affecting visibility..

Nice. I can't wait to see the video.

looks good

http://www.youtube.com/watch?v=sIZyx1Iuptg

There ya go. First 8 video for me. I did my best :wallbash:

like the concept but could be better.

on the other hand, someone HAS to say it...
where did you get the chrome trim? Pepboys? time to de-rice that thing!

^+1, for your first try not bad at all.

I love the idea but would rather them be in the mirror itself.

good concept doesnt look that bad ... i must ask why all the chrome thou

I actually really like the chrome. Since I dont have any body mods on it, I think it looks kinda bland without something. my plan is to eventually start getting stuff put on like M-1 speed kit and definitely new fenders cause some pos side swiped me in a parking lot and ran. I originally had done the rims one weekend anticipating new rims soon, but got bogged down with speeding tickets haha. Thanks for the flame, but I enjoy what I've done with it for now :P

*also, another idea I had about the turn signals would be to place them behind the mirror to produce a kind of glow behind it... idk just an idea if you didnt like the exposed strip.

Cool concept. Whatever you wanna do, do it. Keep us updated with videos, yah...

Jesus christ all the chome needs to get torn off asap

:cwm27::gotrice:
Well, at least the turn signals aren't that bad looking. Will definitely help for those approaching your blind spot/ while merging.

If he likes the chrome, more power to him. Liked the mod and glad its so cheap

Don't drive with the blinker running!



:icon_no2:

Love the blinker idea, mad props for that. +1 for added safety as well.

The rest of your car................... well.............. to each his own. But either way you get points for coming up with something cool no one else has done on a 8.

Yea, to each his own...

i was also wondering how that would look behind the mirror making a "glow" effect...hmmm but overall not bad.

I would like to be able to look at what is reflecting off my mirror when I am changing lanes in the dark :squint: .