RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Do It Yourself Forum (https://www.rx8club.com/series-i-do-yourself-forum-73/)
-   -   DIY : Double shifter boot/gaiter/insulator mod ! (https://www.rx8club.com/series-i-do-yourself-forum-73/diy-double-shifter-boot-gaiter-insulator-mod-271386/)

motodenta 05-16-2020 04:58 PM

DIY : Double shifter boot/gaiter/insulator mod !
 
The rx8's has 3 gaiters, most superficial one is mostly a cometic boot,
middle one is real deal gaiter(#2 in pic) which is bolted and lastly deepest one is insulator for wind. (#3)


https://cimg1.ibsrv.net/gimg/www.rx8...2b64aa702e.jpg



https://cimg7.ibsrv.net/gimg/www.rx8...b18a461184.jpg





Thing I did double the isolator and used other one upside-down. To do this you need to cut upper part with a scissor, to become like right side pic.
https://cimg8.ibsrv.net/gimg/www.rx8...5b4c9857ed.jpg


And, now fit cut one it upside down, Don't forget to add grease to hinge ball of stick.
https://cimg4.ibsrv.net/gimg/www.rx8...37f44dcf7c.jpg

Work it all around inside to become like this :
https://cimg5.ibsrv.net/gimg/www.rx8...134b0756e7.jpg

Work with help of long nose plier pull back the middle section a dab inside :
https://cimg3.ibsrv.net/gimg/www.rx8...f91f544b5b.jpg

It is advisable to replace the self adhesive part of 2nd isolator with quality double sided tape :
https://cimg1.ibsrv.net/gimg/www.rx8...b673a0c48f.jpg

Now its time to utilise some thin layer of available sound dampening.
https://cimg5.ibsrv.net/gimg/www.rx8...52d7459f9f.jpg

https://cimg3.ibsrv.net/gimg/www.rx8...cb9bc69961.jpg

https://cimg0.ibsrv.net/gimg/www.rx8...2d2448276e.jpg

https://cimg7.ibsrv.net/gimg/www.rx8...d61f35c3af.jpg

https://cimg2.ibsrv.net/gimg/www.rx8...e912943aba.jpg

https://cimg8.ibsrv.net/gimg/www.rx8...a6dbd45893.jpg

https://cimg3.ibsrv.net/gimg/www.rx8...4fac28c824.jpg

I found this shitty Poundland /Dollarstore anti skid locally available. Its a thin layer of self adhesive carpet.
https://cimg3.ibsrv.net/gimg/www.rx8...6e59f0e309.jpg

Lastly put back the main gaiter and fasten nuts, lay down factory felt
https://cimg1.ibsrv.net/gimg/www.rx8...e0fe91244c.jpg

TeamRX8 05-17-2020 11:37 AM

I hope you understand that somewhere down the line those hotlinks are going to be dead and this thread will be even more useless than it would be had you taken the time to properly upload the photos to the forum using those links.

I still don't understand why they allow hotlinks in here in the first place; there’s no shortage of the dumb to go around I suppose.

.

motodenta 05-17-2020 02:53 PM

I edited and upload pics here, however, it only shows links. It must be image size related issue ? Is there any guild line for forum limits ?
My memory is faded to using direct codes. next time I'll use smaller pics.


All times are GMT -5. The time now is 11:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands