dodo_croatia

If someone wuz intersted of making a custom install, this wuz the way i did it.
I used a DSL 2-way system (tweeters and mid-bass speakers) with crossovers.

It SOUNDS BEAUTIFUL !

1. First take this out of your car and cut the plastic box out

dodo_croatia

2. Make a paper model of the box

dodo_croatia

3. Cut the wood

dodo_croatia

4. Put the panels together

dodo_croatia

5. Try to see does box fits into the plastic

dodo_croatia

6. Fill the edges of the box so air does not leak

dodo_croatia

7. Try to make the box to fits better to the plastic (remove the edges)

dodo_croatia

8. Make the holes on the plastic

dodo_croatia

9. Make the holes on the box

dodo_croatia

10. Fit the box with the plastic and glue it

dodo_croatia

11. Fill the empty space between the box and the plastic with hard foam, i used metapur foam (dont know how is it called on english, its the blue stuff on the pisture)

dodo_croatia

12. Finished enclosure

dodo_croatia

13. Enclosure fitted in the car

dodo_croatia

14. Tweeters behind the back seats

dodo_croatia

15. Trunk space with amp and crossovers. Wires will be fitted later on,i didnt have time.

dodo_croatia

16. Special thanx to my mum, she helped me a lot

mikeb

again
that is so sweet :D

Omicron

Well done! A very nice DIY! :D

Texas 8

I just found this. Sweet!

jenkins-crew

Good job DODO!!!!!!!!!!!

Mr. Ed's rx-8

good job mum!

Dremd911

dam that is a nice custom job too bad i suck at wiring ****....i need a teacher

1145climber

is the plastic strong enough to mount the speakers without reinforcement???

aerospacediver

you did remember to flip the polarity of the reversed speaker... please say yes?