Is there a definitive solution for o2 simulator with midpipe?
hi
I've seen there are lots of post with different solution to stop the cell problem with the midpipe and o2 simulator I thinks several of you are driving with midpipe and try different solutions so could tell us your final solution to stop the cat cell ??? thanks |
Yeah, it's called get a catalytic you polluting bastard :mdrmed:
Get a high flow cat and all your problems are solved. |
So far...
I've not heard of a working solution, so far.
S :sad: |
You've heard of it, just refuse to acknowledge it
The GTAW bushing is working for some people :dunno: I've got one I'll let you try, if it works you pay me for it, if not send it back |
hey i would like to try that bushing from you if thats ok
|
Do the 18mm spark plug defouler trick, same concept as the GTAW "bushing" except it costs about 2 dollars to do.
|
similar, but not the same, nobody has gotten one of those to work yet
|
They aren't doing it right then maybe? I've personally seen it work a few different local cars.
|
receive the ebay o2 simulator today
looking for a tube actually I try to do the modification this we I think it will not work ... but I try it ... |
again, it's not the same thing ...
|
yes
but really similar : 2 defouler with 1 hole I contact GTAW ... .no answer |
hello
I've got my custom midpipe now what a sound .... it's really noisy and the car smell like the small 1/8 thermic buggy (funny) I drive for 15 miles with my o2 simulator ... nothing yet I think tomorow I will see the cell...... |
I've driven with my midpipe for about 300 or so miles with no CEL and NO simulator/bushing... Sometimes it takes a while. So give it a couple thousand miles before you know it "works" :p:
|
oki
thanks will wait and see amizing the sound .... I think I drive a bike with an akrapovik lol do you now if there is a difference with torque or hp between a supercat and a midpipe ?? a little difference (1-2hp) or big (5-8 hp) ??? |
hello
now arround 150 miles .... and no cell I think it's ok but it's really loud perhaps the solution : exhaust valve controller : http://i9.ebayimg.com/02/i/02/bf/9d/04_1_b.JPG FULLY ADJUSTABLE SWITCH FROM 100% OPEN TO 100% CLOSE.( 30%...55%..80%..all range adjustable) * HEAVY DUTY MOTOR WITH POLISH LOOK, MADE IN GERMANY. * 2.5" INLET. 2.3" BUTTERFLY. * SIMPLY ADJUST EXHAUST RESPONSE AND VOLUME FROM THE SEAT. NO MORE PAIN IN THE BUTT TO PUT ON AND OFF THE SILENCER. * BACK LIGHT SWITCH. * REDUCE THE CHANCE TO GET ATTENTION FROM POPO. (POLICE) WHY PAY MORE TO COURT WHEN U CAN ALREADY AFFORD A NICE UNIQUE ITEM LIKE THIS? YOU CAN DRIVE YOUR PROJECT ON THE STREET WITHOUT WORRIES!! *GREAT COMBO USE WITH TEST PIPE* and 185 $ on ebay anybody test it ?? |
that goes with a cut-out which would be infront of the CAT. From what i understand the gains are going to be very minimal.
|
Originally Posted by florent75
do you now if there is a difference with torque or hp between a supercat and a midpipe ??
a little difference (1-2hp) or big (5-8 hp) ??? -hS |
I think the difference in hp should be minimal
but when I see how the car rev now without the cat I think you should have a difference in torque with the cat (minimal perhaps cause it's a sport cat) |
Originally Posted by BigOLundh
I talked to RP before i ordered mine. They said there was barely any difference between the two, and highly recommended going with the high-flow cat.
-hS |
Originally Posted by strokercharged95gt
Gee the company is trying to push their more expensive product, imagine that?
|
maybe they're just more environmentally responsible than most of you guys ...
|
You'd notice the difference more with a turbo'd car than n/a.
|
Originally Posted by TeamRX8
maybe they're just more environmentally responsible than most of you guys ...
Plus they're in Texas, since when is anyone in Texas concerned about the environment? (joke) |
hello guys
300 miles later ...... the cel come on .. so the o2 fouler on ebay is not working .... I buy today the bonez cat ..... |
so reading through all of these post on this thread....you guys would reconmend that it would be better to go with the high-flow cat. There really isn't a difference that much in power, and you are really just paying for the loudness, oh and the two foot flames that shoot out the back. Thats my next question would you still be able to shoot the flames with the high flow cat on.....I think that is cool as shit, that way if some A-Hole gets to close I can just give it a rev and take care of him.
|
All times are GMT -5. The time now is 11:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands