RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   ScanGaugeII - Review (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/scangaugeii-review-105834/)

mysql101 12-26-2006 05:12 PM

i bought it from thinkgeek.com for $169.

later on I bought another from a reseller on ebay for $150. cheapest i could find.


btw, the problem I mentioned having.. I wrote to them and scangauge tech wrote back:


We have a cure for the problem you are seeing. It is caused by a low transient voltage in the vehicle. If you send it to us we will make the change and return it to you.
Is he saying my batt voltage is not stable? Anyway, free fix for my problem, and one week ETA on returning it to me.

Zero_Rotary 12-27-2006 11:34 AM


Originally Posted by NMOcho
I just purchased mine and it scans correctly, but my traction control light remains on with the scanguage plug in, the cruise on light flashes, and my tach and speedo flash with the current RPM/MPH every other second. Linear-Logic is replacing my unit as my friends works fine in my car. But I agree the simplicity and size of the unit is great. Plus when that check engine light comes on you can quickly see what the issue is and if it needs attention. Plus it comes handy when Auto X as you can track your top speed, RPM and mpg...ect.

I had the same issue before...but not anymore
You may want to check out this thread:

https://www.rx8club.com/showthread.p...ight=scangauge

redcivic 12-27-2006 08:51 PM

I for one thank you for this info. It is much better than other things I have seen in this price range. Where can I get it?

mysql101 12-27-2006 08:57 PM

...look up 2 posts.

redcivic 12-27-2006 09:13 PM

Shit, thanks. don't know how I missed that.

redcivic 12-27-2006 09:22 PM

Okay, it's December 2006 so is this feature available yet?

"ScanGauge II to USB Interface available in September 2006. Allows data logging, field upgrades, data downloads and more"

NMOcho 12-28-2006 03:23 PM


Originally Posted by Zero_Rotary
I had the same issue before...but not anymore
You may want to check out this thread:

https://www.rx8club.com/showthread.p...ight=scangauge


Thanks for the info. :) that is exactly what was going on. I didn't test color background, just going to get the new one and go. Maybe a bad batch was made indeed..

by the way I have the Escort GT2 timer and it is equally fun to play with. So far it appears pretty accurate. :rock:

mysql101 12-28-2006 03:25 PM


Originally Posted by redcivic
Okay, it's December 2006 so is this feature available yet?

"ScanGauge II to USB Interface available in September 2006. Allows data logging, field upgrades, data downloads and more"

I haven't heard anything about it being available yet, and I think it's at an extra cost ($100?). at that price point I'd just buy a canscan for logging.

redcivic 12-28-2006 06:21 PM

Cool. Do they have a website or is the geek store the only way to get it?

Derex'8 01-24-2007 11:26 PM

Sounds Hella nice can't wait!!!

http://www.pureenergysystems.com/sto...nGauge/USB.htm

mdw1000 08-01-2007 06:52 PM

Sorry to revive an old thread, but can some of you who have this post pictures of how you mounted this? (waiting for photoshop pics now of someone humping a scanguage)

I found a couple old pictures, but that was about it. I am having trouble figuring out the best place for it in the 8.

Thanks!

mdw1000 08-02-2007 01:34 AM

I ended up going with mysql's method. I think that's the best choice.

Shifty Devil 08-02-2007 10:48 AM

I never mounted mine, it's still laying in the ashtray. The biggest problem with the guage is the size of the cable, it's too big and stiff (add your own joke here) to hide or route out of sight. The dash on the 8 just doesn't have any blank spots to add much of anything.

mdw1000 08-02-2007 12:47 PM

Unfortunately i've got my radar detector plugged into the cigarette lighter, so there is not enough room left for the scangauge there. Plus I wanted it in my line of sight - didn't want to have an accident while checking my water temp :)

I was able to run the cable at least temporarily around the left side of the gauges, in between the silver and the black on the left side. Then I ran it down behind the left side of the steering column, wrapped it around the opening down there, and tied it off with a twisty tie. Was intended it as a temporary solution, but I just might leave it that way. Then if I want to use it in another car, it is easy to remove.

Anybody know if it is possible to get an idea of your oil temp by looking at the water temp and intake air temp? Want to try to get an idea of how hot my oil is getting to see if I really need to change it more often than the standard 5000 mile interval.

mdw1000 08-03-2007 04:33 PM

Well, I've been watching my water temp the last couple days. Its in the mid 90s F here. Highest I've seen the water temp is 211. That's with average driving and a few redlines. Anybody have any thoughts on oil life with those kinds of conditions?

Interesting thing is that the dash water temp gauge reading shows its usual spot after warming up. But the actual water temp is only like 160 degrees then. It stays in the same spot all the way up to the 211 that I got. So I think not only is the oil pressure gauge a dummy gauge in the 8, but the water temp gauge is too. I think it sits on that normal spot as long as the water temp is within a certain broad range, just like the oil pressure gauge. Has me thinking about getting those gauges pulled and replaced with functional gauges. Since I've got the scangauge with the water temp, maybe a functional oil pressure gauge and a oil temp gauge.

zoom44 08-03-2007 10:19 PM

the water temp moves up until it gets to the normal range and then doesnt move again until the water temp passes 220

you can not "pull" the guages and replace them

Tamas 08-06-2007 01:41 PM

I just hooked up my ScanGauge II and everything is fine, except that the 'custom color' option doesn't work. All I can get as backlight is green. I can set the other colors from 0 to 3 but nothing happens, the backlight remains green. Did anyone else have such a problem or is my unit defective?

I'd rather like to match the stock orange / red lights instead of the green - it looks out of place.

mdw1000 08-07-2007 12:59 AM

Are you hitting "Save" after you set them? Made that mistake myself a couple times.

Shifty Devil 08-07-2007 12:55 PM

If your dash guages start behaving weird you'll have to set the color back to white. Mine and some others here have had the colored backlight setting turn on the DSC lamp and mess up the tach.

Tamas 08-07-2007 06:19 PM


Originally Posted by mdw1000 (Post 2003772)
Are you hitting "Save" after you set them? Made that mistake myself a couple times.

Yes, I did hit 'Save', still no dice.
Actually, while you select the color components (before even hitting 'Save'), the screen is supposed to change to that combination, but this only works with the green, such as: no backlight, low intensity green or high intensity green. No other color appears.
This is weird. I'll ask Linear Logic's tech help line if they know some fix.

mdw1000 08-08-2007 01:18 AM


Originally Posted by Shifty Devil (Post 2004386)
If your dash guages start behaving weird you'll have to set the color back to white. Mine and some others here have had the colored backlight setting turn on the DSC lamp and mess up the tach.

Has there ever been a fix found for this? This has happened to me twice when I've started the car. I used the Scangauge to reset the codes, turned off the car (when it was warmed up) and started it again and the DSC light went away.

Bastage 08-09-2007 07:31 PM

Got one of these today and I'm very happy with it. It has an amazing amount of features for $159.99 shipped.

auzoom 08-10-2007 08:16 PM

The reason the AIM option is so tempting is the addition of external sensors. I love the idea od the Scan Guage but the missing oil temp and pressure are what holds me back.

brtzrx8 09-21-2007 10:22 PM

Scan gague II settings
 
Does anyone know what is the right setting is for the Scan Gage II? My unit doesn't seen to be give correct "miles to empty" numbers. With a full tank it says that I can drive over 260 miles, which hardly seems correct on the 8.

I wonder if it has anything to do with the engine size setting. I have this set at 1.3L, but I am not sure if the unit knows the difference between a rotary and piston engines.

Anyone else has a similar experience?

Psychofox 09-27-2007 01:21 AM

what kind of MPG reading do you guys get?
mine doesn't seem to read the correct figure.
it fluctuates between 1.0 to 50 something, and sometimes it shows 9999
I rarely see readings that's in 15 to 20 range. make me wonder if i have a defective unit or not.


All times are GMT -5. The time now is 06:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands