RP Short Shifter (get in the queue...!)
#101
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Richard Paul
Can't think of how long ago it was that I got that much reaction from a girlfreind. Certainly not one of my ex wives. I Take that back, my second one was a *****.
Hows that Gomez?
Hows that Gomez?
#102
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gomez
P.S....Have you made a decision on the aluminium silicon bronze cup idea?
#103
Registered
iTrader: (5)
I'm holding off on the bronze cup for now. Let's see how the MDS impregnated nylon 6/6 works first. Rotarygod has told me that on his 7 he has seen this part completly disapper. If that is the case then something should be done. Maybe my new polymer will fix the problem. It's not hard to change. Maybe when we have time we will test one.
#104
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Richard Paul
I'm holding off on the bronze cup for now. Let's see how the MDS impregnated nylon 6/6 works first. Rotarygod has told me that on his 7 he has seen this part completly disapper. If that is the case then something should be done. Maybe my new polymer will fix the problem. It's not hard to change. Maybe when we have time we will test one.
#106
Originally Posted by Richard Paul
Yes of course we retain the lockout. Have no fear we wouldn't do that to you.
Rasputin, I don't know that. You might check the part numbers and see if the same shifter fits in stock transmitions. They may be entirely different trans from different venders. Or they could be built inhouse and share parts. What is the splt in sales over there? Also the highperformance driver usually buy the 6 speed anyway.
Rasputin, I don't know that. You might check the part numbers and see if the same shifter fits in stock transmitions. They may be entirely different trans from different venders. Or they could be built inhouse and share parts. What is the splt in sales over there? Also the highperformance driver usually buy the 6 speed anyway.
Fabrice
#108
Registered
iTrader: (5)
As we speak the pivot socket is being machined. After they scrap a few and get the program down the only thing left is the little shoe and we are ready to test. Give the testing some time and I can't say how long because it will be wrong and I'll get s--t over it.
But it is a matter of days till the beta testing starts. There are two feild cars ready to go, one with a mazdaspeed shifter in it already. As soon as they say it is good we will ship.
But it is a matter of days till the beta testing starts. There are two feild cars ready to go, one with a mazdaspeed shifter in it already. As soon as they say it is good we will ship.
#109
Woot, They ask and shall recieve. Thanks R.P.
Why would we give you **** over it? I'm Pretty sure no 1 wants to buy a product that hasn't been tested. example " i just found this awesome new substance. "doctor2" What is it? "doctor1" Its arcenic, lets sell it as a food additive! "doctor2" Good idea, but lets try it first. BAM DEATH!!!!
omg i just went on a tirade. yah so rp take ur time give us something good.
Why would we give you **** over it? I'm Pretty sure no 1 wants to buy a product that hasn't been tested. example " i just found this awesome new substance. "doctor2" What is it? "doctor1" Its arcenic, lets sell it as a food additive! "doctor2" Good idea, but lets try it first. BAM DEATH!!!!
omg i just went on a tirade. yah so rp take ur time give us something good.
#111
Not so Super right now
Join Date: May 2003
Location: Beyond that there swamp.
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
magix: He's making fun of the epople giving him crap on the SC thread who jkeep asking for updates.
All I know is I better get one of these, preferably this year, but if not January is cool since my boss is gonna owe me a favor :D (ie. Free shifter!)
All I know is I better get one of these, preferably this year, but if not January is cool since my boss is gonna owe me a favor :D (ie. Free shifter!)
#112
Rangers Lead The Way!
Originally Posted by Genom
magix: He's making fun of the epople giving him crap on the SC thread who jkeep asking for updates.
All I know is I better get one of these, preferably this year, but if not January is cool since my boss is gonna owe me a favor :D (ie. Free shifter!)
All I know is I better get one of these, preferably this year, but if not January is cool since my boss is gonna owe me a favor :D (ie. Free shifter!)
The Beta testing for the shift kit shouldn't take longer then 2 weeks once Richard finishes up the fabrication of the other peices.
#113
"highjack" It was weird in the sc thread ppl kept trying to poke at rich like hes trying to make ppl angry. "end"\
woot Im pysched i hope to get 1 for 300 simoleans. Ps not asking for prices just wishfull thinking.
woot Im pysched i hope to get 1 for 300 simoleans. Ps not asking for prices just wishfull thinking.
#115
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by magixpuma
i hope to get 1 for 300 simoleans. Ps not asking for prices just wishfull thinking.
#116
Originally Posted by Gomez
300 simoleans will secure one for you if the exchange rate is 1:1 with the USD, don't you worry about that my friend from another planet.... :D
Try to charge Puma more and/or put his name at the end of the list so he has to wait until Christmas 2005.
Last edited by TyrellCorpNexus8; 12-17-2004 at 03:01 AM.
#117
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TyrellCorpNexus8
Gomez,
Try to charge Puma more and/or put his name at the end of the list so he has to wait until Christmas 2005.
Try to charge Puma more and/or put his name at the end of the list so he has to wait until Christmas 2005.
Or because it will take him that long to get his car fixed...... :D
Gomez.
#118
Richard Paul- would you consider fabricating some metal clips for our center console lid?
I think this is a minor project that a lot of us could really benifit from.
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-center-console-slanted-button-fix-40425/
https://www.rx8club.com/rx-8-discussion-3/center-console-button-37144/
https://www.rx8club.com/rx-8-discussion-3/crummy-center-console-31978/
.. etc.
I think this is a minor project that a lot of us could really benifit from.
https://www.rx8club.com/series-i-do-yourself-forum-73/diy-center-console-slanted-button-fix-40425/
https://www.rx8club.com/rx-8-discussion-3/center-console-button-37144/
https://www.rx8club.com/rx-8-discussion-3/crummy-center-console-31978/
.. etc.
#119
Rangers Lead The Way!
Originally Posted by w0rm
Richard Paul- would you consider fabricating some metal clips for our center console lid?
I think this is a minor project that a lot of us could really benifit from.
https://www.rx8club.com/showthread.php?t=40425
https://www.rx8club.com/showthread.php?t=37144
https://www.rx8club.com/showthread.php?t=31978
.. etc.
I think this is a minor project that a lot of us could really benifit from.
https://www.rx8club.com/showthread.php?t=40425
https://www.rx8club.com/showthread.php?t=37144
https://www.rx8club.com/showthread.php?t=31978
.. etc.
#120
Originally Posted by philodox
What does this have to do with the short shift? hehe..
So i hijacked- guilty as charged :D
#121
Rangers Lead The Way!
Originally Posted by w0rm
I considered making a new thread.. and figured he might be too busy to check on it. then I considered PMing him, but realized I couldnt get others to chime in..
So i hijacked- guilty as charged :D
So i hijacked- guilty as charged :D
#122
Registered
iTrader: (5)
That looks like a shity little anoying problem. I can't belive Mazda hasn't come up with a replacment themselves. It must be costing them a bunch to fix every car several times. I'm activly looking for a car to buy right now so I will probably have that problem myself.
Who knows if it lends itself to just being duplicated in aluminum I may just do that. But plastic has the advantage of being self lubricating. It really isn't something that we could take on unless it starts to bother me personally then I'll get mad at and kill it.
Who knows if it lends itself to just being duplicated in aluminum I may just do that. But plastic has the advantage of being self lubricating. It really isn't something that we could take on unless it starts to bother me personally then I'll get mad at and kill it.
Last edited by Richard Paul; 12-17-2004 at 09:00 PM.
#123
X-Sapper
Join Date: Jan 2004
Location: where angle's fear to tread
Posts: 2,392
Likes: 0
Received 0 Likes
on
0 Posts
every time i come to this thread i am always drooling with anticipation waiting for this kick a$$ shifterD:D i can' wait...hehe if it's out 1st quarter of next year i'll have to ask santa to delay my present till then
#124
Shifty Bastard.
Thread Starter
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Richard Paul
I'm actively looking for a car to buy right now so I will probably have that problem myself......
P.S Richard, I got your P.M, haven't received your email.....