RB Header Installer?
I wanted to know if anyone knew how to (i would pay you) or knows a shop that can do it for me and how much would it cost to get installed. I want it done right and by someone who knows what they are doing instead of taking my 8 to any shop and getting a 2nd rate job.
Im in the Manhattan Area but willing to travel! Racing Beat Header Link: http://www.racingbeat.com/resultset....rtNumber=16133 |
i got mine installed for 270
|
Originally Posted by KrumbZ
(Post 3037764)
i got mine installed for 270
|
how do you like your Header so far? any noticeable differences? I'm thinking of buying one of those header too.
there is a Exotic Speed Race Header for 700 only 30 pounds, how many pounds for the RB Header ? |
Originally Posted by lancer
(Post 3037882)
how do you like your Header so far? any noticeable differences? I'm thinking of buying one of those header too.
there is a Exotic Speed Race Header for 700 only 30 pounds, how many pounds for the RB Header ? |
Lancer,
I just bought an RB header, havent installed it yet. It weighs somwhere around 15 llbs. |
It's easy if you have a lift. I replaced my gasket when I did mine, but you should be able to reuse the OE gasket. If you plan on doing a secondary air pump delete, get the blocking plate and put it on the header first. Also, if you had the new motor mount TSB done, you will need to cut part of the new heat shield away.
|
No TSB done, No secondary air pump delete and i just want the Header installed and thats it.
Anyone around here got a small shop with a lift on it that can do it for me? Or knows a good shop that will do it? Dang i just need a local shop lol Oh and lancer don't get the exotic speed header the RB is just as good and its cheaper. Here is a video of Luckycat's RX8 ( i got my header from him since hes going TURBO) [EMBED]1BPm7M2DTOg[/EMBED] |
It isn't that hard to do yourself (on jackstands even, no lifted required). You can get it done in a few hours even if you don't know what you're doing.
|
Chicken you wanna come to NY and install it for me? LMAO :rofl:
Trust me i cant do it, I don't have the space nor the tools to even begin to do anything like this. PS. Chicken your car is sick dude!! 300HP?!?! Got any pictures of your hood down? Im getting that TSII! |
sounds nice! if your willing to drive out to long island I will do it for you. no lift needed.
|
Originally Posted by Juansito
(Post 3037970)
No TSB done, No secondary air pump delete and i just want the Header installed and thats it.
Anyone around here got a small shop with a lift on it that can do it for me? Or knows a good shop that will do it? Dang i just need a local shop lol Oh and lancer don't get the exotic speed header the RB is just as good and its cheaper. Here is a video of Luckycat's RX8 ( i got my header from him since hes going TURBO) [EMBED]1BPm7M2DTOg[/EMBED] |
It gives it a nice "hollower" sound to it. It didn't get any louder for me but I was catless before and after. I noticed more low end grunt between 4-5k mainly. Couldn't tell too much in the 8-9k range. Hope you enjoy it once it's on, I enjoy mine :)
|
Originally Posted by GAMBEAN
(Post 3037992)
sounds nice! if your willing to drive out to long island I will do it for you. no lift needed.
Originally Posted by rx8thunder
(Post 3038011)
It's hard to tell how the header changes the sound because of the other variables in the mix (CAI, mid-pipe and Catback). Anyone that has one, how has it changed the sound of your car? Louder? Changed the character of the sound? Any before and after vids?
|
stock header weighs 17lbs.
i doubt the exoticspeed weighs more than that. |
Originally Posted by kersh4w
(Post 3038067)
stock header weighs 17lbs.
i doubt the exoticspeed weighs more than that. |
because its rb is not "exotic?"
the re-amemiya header costs a ridiculous amount. imo, all the headers are copies of each other. they all look the same. the only header that looks different is the one teamrx8 built himself... and he put down 224whp.... and it weighs 8lbs. |
Originally Posted by kersh4w
(Post 3038078)
because its rb is not "exotic?"
the re-amemiya header costs a ridiculous amount. imo, all the headers are copies of each other. they all look the same. the only header that looks different is the one teamrx8 built himself... and he put down 224whp.... and it weighs 8lbs. + Those 1 offs are pretty hard to come by cause i don't think teamrx8 is going to be making anymore and if he sold it -- he would most likely charge something crazy for it. |
any one have one RB header for sale, I need one.
|
Originally Posted by lancer
(Post 3038106)
any one have one RB header for sale, I need one.
I'm going to get mine install by GAMBEAN, I hope he can install it for me then i will be SUPER happy! |
Originally Posted by Juansito
(Post 3038101)
+ Those 1 offs are pretty hard to come by cause i don't think teamrx8 is going to be making anymore and if he sold it -- he would most likely charge something crazy for it.
i'll tell you... its in my garage. and unfortunately im selling it back to him. for $200. :eyetwitch |
Originally Posted by Juansito
(Post 3037990)
Chicken you wanna come to NY and install it for me? LMAO :rofl:
Trust me i cant do it, I don't have the space nor the tools to even begin to do anything like this. PS. Chicken your car is sick dude!! 300HP?!?! Got any pictures of your hood down? Im getting that TSII! LOL If I was local I would help you out. My hood isn't the TS-II, it's the Seibon KS Evo-style version
Originally Posted by kersh4w
(Post 3038067)
stock header weighs 17lbs.
i doubt the exoticspeed weighs more than that. |
The stock is 17 and i think the RB is 14-15? I don't remember.
Great news guys! GAMBEAN is going to get my header install on Saturday. Hes in Long Island -- If anyone wants to come and hang out i dont GAMBEAN would mind. Hes going to re-install his mid-pipe on Saturday and then get my header installed! cant wait!!!!
Originally Posted by kersh4w
(Post 3038427)
yeah... guess where that header is sitting right now?
i'll tell you... its in my garage. and unfortunately im selling it back to him. for $200. :eyetwitch |
Although I never install a header before, Im 99.99% sure that you dont need a lift to install it. Hell I mean you dont even need a lift to replace an engine, :) so why a header ? :)
I have tools and everything so ... Ahh, just notice that GAMBEAN is here :) maybe I should stop by to see how sweet its going to be ... :) |
Its not hard... just gotta remove the RF wheel, Support the engine, take out the RF engine mount and remove the old header bolts. Then reverse the order to get it on. The hardest part is the EGR tube but its not too bad. Goodluck :)
|
All times are GMT -5. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands