RB Gauges pod
guys, i am just asking an opinion, i have rb pod, i am not planning to use the middle on, how do you think i can cover it? any idea? i just need some advice, just want to see if other people have a better idea to come up with. i have aem oil temps, but i decided not to use thtem becuase my mechanic has to tap something. i don't want to make him have a lot of work. i need advice guys..thank you
steven |
If it came with the RB Oil adapter then you don't have to tap anything.
|
Originally Posted by halimsteven
(Post 2345753)
guys, i am just asking an opinion, i have rb pod, i am not planning to use the middle on, how do you think i can cover it? any idea? i just need some advice, just want to see if other people have a better idea to come up with. i have aem oil temps, but i decided not to use thtem becuase my mechanic has to tap something. i don't want to make him have a lot of work. i need advice guys..thank you
steven |
You can cover it up unused holes with pod covers like these: http://www.gaugepods.com/lenscap.jpg
|
SE3P that looks fug :( You should just hand draw a clock on it showing 12 pm everytime
|
Go to hardware stote buy a pipe cover in black.
|
Originally Posted by HiTMaNN
(Post 2345777)
SE3P that looks fug :( You should just hand draw a clock on it showing 12 pm everytime
|
i think i should get the RB adapter, so i don't have to tap anything. is it oil temp or pressure? or it's up to us.....
thank you for the opinion guys steven |
There are one hole for the oil temp and another for pressure. You can just cap it off with a screw if you're not using it.
|
Originally Posted by halimsteven
(Post 2346437)
i think i should get the RB adapter, so i don't have to tap anything. is it oil temp or pressure? or it's up to us.....
thank you for the opinion guys steven |
i will try, but i will try if i can fit three gauges on rx pod because i bought everythin AEM 52 mm, and last time we try to put two of them, it seems that the read is really tight and there is no space for the middle one. i will try to figure out, and i will post pics
|
I have all 60 mm Defi BF so I dunno aobut how RB + AEM will fit.
Post pics when u're done :) |
1 Attachment(s)
Originally Posted by halimsteven
(Post 2345753)
how do you think i can cover it?
I'm sorry, I couldn't resist :lol: Seriously though, just get the RB sandwich plate and put in the third gauge |
Originally Posted by CnnmnSchnpps
(Post 2349653)
https://www.rx8club.com/attachment.p...1&d=1205551300
I'm sorry, I couldn't resist :lol: Seriously though, just get the RB sandwich plate and put in the third gauge bad news, i went to my mechanic house, and i found out that the third gauge didn't fit because AEM has a big face...i was pissed. my mechanic will do something, i don't know what will happen, he will work it out, but it will look little different from how it's supposed to. i have (truboost, AFR, and oil temps). note: just an advice, don't use AEM (all three) on RB pod because it will not fit. i will show the pics tomorrow.... bangkok got turbo, so bangkok can do faster business ,...hahahhahaha..caution guys, bangkok is coming........ steven |
All times are GMT -5. The time now is 08:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands