pulley problem
ok so i have teh agency pulley just havnt installed it on my car yet. i was reading a post and the guy said his u/d pulley came w/ 3 hex bolts. my a/p did not come w/ any bolts just two belts... what do i do? will the stock bolts work? or do i need to order some? and if so where do i get them?
|
The stock bolts will not work with the AP pulley.
Did you buy it used? If you bought it new, I would contact your vender, but if used contact Agency Power or you can try Vivid Racing also. |
never mind talked to the vender and they are sending me some!
|
Yee Haw!
|
Originally Posted by WoodsOfGreenRx8
(Post 2281065)
The stock bolts will not work with the AP pulley.
|
Originally Posted by Mikeluvs8
(Post 2281564)
yes they will, im using the stock bolts.:)
Well than! I was wrong. :banghead: |
oh well then i dont really care to wait for the ap bolts then huh?
|
I don't know how the hell anyone managed to use the stock bolts as there's not enough clearance on either side to get a socket around them!
I took the pulley and stock bolts to NAPA and had them match up a set of hex bolts to fit. Cost me $4, problem solved. |
Originally Posted by Flashwing
(Post 2281693)
I don't know how the hell anyone managed to use the stock bolts as there's not enough clearance on either side to get a socket around them!
I took the pulley and stock bolts to NAPA and had them match up a set of hex bolts to fit. Cost me $4, problem solved. |
im using stock bolts too
|
Originally Posted by california style
(Post 2281732)
im using stock bolts too
|
Originally Posted by Flashwing
(Post 2281748)
Kudos to you guys...I wonder if it's a model year difference. Well, if you can't reuse the stock bolts, hex are easy to get.
|
All times are GMT -5. The time now is 11:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands