Need help on the MazdaSpeed Intake
 

Ok ive searched and found people saying yes and no about sucking up water in the rain with a MazdaSpeed CAI. Please help cause im already in the process buying a MazdaSpeed CAI cause the K&N is on back order, should i wait or get the MazdaSpeed? please HELP!!! me choose!

MS CAI is very nice. I haven't had any issues, and it rains a lot in Tampa. Just don't drive in 2' of water.

MS CAI is fine, get that.
Just use caution when washing the car, don't direct the water stream directly at the filter.
I ran mine through many car washes with no problems.
Wasn't until the dealer sprayed water directly on the filter did I get too much water in my intake and it bogged the car down (water across the MAF).
Someone here had a good idea to put a plastic bag over the filter while washing the car just to be safe.
And don't worry about rain... I ran through many storms with no problems.

Water doesn't hurt the engine. It just turns to steam. It actually helps clean the motor out. But I'd recommend distilled water, or some clean source for scheduled cleaning, over street puddles.

Yeah... its not the water entering the engine, but the inaccurate reading across the MAF from the water.

Sounds Good To me! :D was that 2FT of water or 2Inches haha

the filter is mounted pretty high. You'd be in pretty deep water to cover it.

Yeah your right. even though i don't have a Cold Air i always find a diffrent route with the least water :D also how many Mesh Screens do i need? 1 or 2? i only have one :[ my other one ripped :banghead:

The MS CAI should come with two screens, both within the couplings.

Thanks Bro :D ill take pics when i get it and install it.

remember the water sock thingy!!! it works nicely.

ive actually put it under the faucet and the water ran off the sides. and it doesnt restrict air flow.

what water sock? outerwear?

This might help you

https://www.rx8club.com/series-i-tech-garage-22/aem-ms-intake-owners-171291/

I have K&N works quite well for me.....very happy with it

yea thats the one!!! thanks!! the MS CAI comes with one of those in black. and i guess the AEM also.

HAHA! :D SCWEET! well parts got shipped. and hopefully it will be here on Wedsday :lol:

MS CAI doesnt come with any screens.

it will ask you to take the screen out of your stock airbox setup.

how many do you need?

REALLY?!
Next time someone asks me if they should purchase the AEM or MS intake, I'll recommend AEM since they provide the screens in their couplers.
I know the screens in the OEM box can be a little tricky to remove.
I had to remove those for my Racing Beat intake.

I retract my previous post.....
I couldn't help it and had to download the MS intake installation manual.
According to the contents section, the MS intake DOES come with two couplers:
Attachment 137687

Dude he just called you a little bitch :icon_no2::whipping:

fail.

beers :beer:

The Mazdaspeed intake comes with 2 screens come on n00b!

And you can't hydrolock a rotary.

I have this MS kit on my car, I was pretty worried at the first, but the thing is the air filter came with filter wrap, so it helps to keep the filter dry and clean. And the funny thing is...my car seems to be running better and faster in the raining days.:uhh::lol:

Another solution is, to buy a heat shield and get it installed, that could help the stop the intake sucking water.

SCWEET! :D do you get better throttle response? ive read on peoples threads that they got really good throttle response after their install. well it should be here in 3 more days :lol: can't wait haha :D