|
Lasse wankel header
Well since i made my first prototype steel header that made 7 hp more on my RotoTest comparing to stock log type manifold i had some problems contacting my Tig guru and header maker. He will not answering the phone, so i have decided to contact another company that shall build and weld my Renesis header. The plan is to launch the header to public in June if no more mishappens takes place! I will post data on my webpage that shall be up in a few weeks.
/Lasse |
Great job! What other modifications accompanied the 7 HP increase? Cat elimination, ECU tuning? Thanks for your time and contributions!
Laters! Edgardo |
:ylsuper:
|
Great work! I look forward to the product. Any pictures?
|
he's got a muffler that will give you 10 hp too ...
|
Any updates on this project or your porting project?
|
Finally i have been talking to my "header maker"! He's back in business and shall begin constructing a small 5 series of 3 pipe stainless Renesis headers for me. When these headers is finished i don't know yet, but i keep you informed!
/Lasse |
good news---keep us udated
od |
Post some pics if you can.
|
Looking forward to seeing your header!
|
coolio!!
|
Sorry for this, i will post on Friday (i'm just screw things up today!)
/Lasse |
yeah, i'd like to see some pics. regardless, i'd like to say good job on getting that far despite whatever people may about it.
|
Is there any difference in sound?
|
Ok! I know it,s already Saturday and no pic yet...but as soon as my friend is home to me with his camera he can upload it for me.
Yes there is a little deeper throatier tone not much but it's there! I think when i measure the sound with a db meter 20 inch 45degree backwards the exhaust it was like 82-83dbA. That was with only the complete exhaustsystem (no header) /Lasse |
Originally Posted by grinn253
(Post 1808863)
Great job! What other modifications accompanied the 7 HP increase? Cat elimination, ECU tuning? Thanks for your time and contributions!
Laters! Edgardo and great job! cant wait till the pics get posted!!! |
update?
|
I would like to see some pics
|
If you actually made 7 hp i would not post any pictures until you have a patent for it.Most headers now only get from 3 to 4 hp ,you never know who might be looking here and steal your design.
|
Pics or it didnt happen...
|
i want to see some proof!! i neeeeed power!!! Muahhahah
|
Originally Posted by eviltwinkie
(Post 1920861)
Pics or it didnt happen...
|
Originally Posted by smrx8
(Post 1920820)
If you actually made 7 hp i would not post any pictures until you have a patent for it.Most headers now only get from 3 to 4 hp ,you never know who might be looking here and steal your design.
those 3-4 hp ones claimed 10 - 15, get a clue ... |
First i actully made on my Rototest 10-12 hp more with "my" Ferrita complete exhaust system minus header. The car went from high 6s 0-60 mph to 6.23s with exhaust system and Shell V-power 99 octane fuel and Motul oils. Then i dynoed with my steel header on same RotoTest hub unit and made +7 hp at 8000+ rpm. 0-60 mph went down to 5.86s. Of course i know this is not proof enough but when Peter G finally makes the first stainless header(hopefully in July) i will have proof with dyno curves and some photos. I have not driven the car since 7 weeks though i had a gearbox failure but next week i will also add an Interceptor X.
/Lasse www.wankelracing.se |
Can you really drop the 0-60 time by almost half a second by gaining 7hp at 8000+ rpm?:spank:
|
| All times are GMT -5. The time now is 10:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands