RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   Borla V.S Agency Power cat back (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/borla-v-s-agency-power-cat-back-188253/)

Kris Crazy8 12-23-2009 02:15 PM

Borla V.S Agency Power cat back
 
I'm having trouble deciding which of the two is a better exhaust and which has a deeper tone or nicer sounding tone opinions anyone ?

carterr68 12-25-2009 05:24 AM

Go Borla I have heard it installed in person really good! almost doesn't sound like a rotary,

invasion08 12-25-2009 05:57 AM

After listening to the sound clips on you tube. I would have to go with the borla exhaust.

Jon316G 12-25-2009 06:18 AM

You really can't judge from video clips... you should hear them in person.
I've heard both in person many times and favor the AP.
Not to mention the AP costs less... even when combined with their mid-pipe.

I'm sure you have a lot of locals around the Chicago area.
Jump on the regional threads and ask to hear each pipe in person and judge for yourself.

AJ's Shinka 12-25-2009 01:43 PM

I would get the TurboXS it comes with the the racepipe and it is $499.00 and it has a deep tone like the Borla and has a thick angle cut tips which look a lot better than the AP imo (unless you have a blue 8). I have two friends that have the AP and Borla and the TurboXs sounds just as good if not better. Just giving you another option.

Mr.Rexx 12-26-2009 11:05 AM

I did a lot of research before I finally got my AP. I heard them all and deep sound was what I was looking for... GL

gh8st 12-26-2009 03:53 PM


Originally Posted by carterr68 (Post 3364665)
Go Borla I have heard it installed in person really good! almost doesn't sound like a rotary,

what's wrong with sounding like a rotary? i'd take a little rotary rasp over a vtec fart anyday =]

05rex8 12-26-2009 04:00 PM

I hate my AP exhaust for two reasons. The tips are too short so they melted my shrouds and leave exhaust soot on my back bumper. The tips are riveted on and now rattle. So annoying. Sound is good but for those 2 reasons this exhaust was not worth it to me. I will end up getting different tips welded on. But then I won't have the sweet titanium tips. :(

carterr68 12-26-2009 07:46 PM

look guy's everyone has a favorate but you have to also look at quality of construction and the usable life of any product.... borla will honor all most anything from i don't like it to the seam has split. i do like the rotary sound but on the street intimidation goes a long way. when some guy/gal comes along side you in a shelby corba and revs then you do....they look at you like holyshit whats in that thing...lol and its not overly load at regular operating rpms (cruising speed) and for clearance it will not melt shroud ie... long enough and double t304 construction.

gh8st 12-26-2009 07:55 PM

punctuation fail.. haha just playing. i know what you're saying and it has been discussed to death. so this thread fails. to the OP. just get what you want.

i'm out

Kris Crazy8 12-26-2009 08:27 PM

well i knew everyone had their own preferences on which exhaust is better i just wanted opinions, my buddy has the AP exhaust and it does have a deep tone to it but personally i think torwards more for the borla its 6lbs lighter then stock and sounds descent and just like every other cat back all you can really hope for is 2-3hp increase

mattrotary34 12-27-2009 01:05 PM

IMO if you have to compare youve already made up your mind about one or the other.. which either one you get is awesome bc theyre both good sounding and performing exhaust.. GL!!

AJ's Shinka 12-27-2009 04:50 PM

While the Borla is an excellent choice in exhaust note, it bottle necks to 2.25 at the end so it is not a 3' exhaust all the way through. You will lose power compared to the AP which is 3' in all the way through.
Like I said I have the TurboXS that sounds just as good if not better than the Borla and it just as light, plus it is 3 in' all the way through with nice 4' in tips that fill in your exhaust shrouds nicer than the Borla 2.5 in tips. Anyhow, it looks like you've made up your mind and it is your money. Just my .02 Enjoy the Borla.

jeepterp 01-08-2010 10:00 PM

I freaking love my Borla........Nice subtle sound when driving easy and the beast unleashes at WOT

lilring 01-09-2010 01:31 AM

AJ SHINKA - The Borla Tips are 4"

Jon316G 01-09-2010 01:41 AM


Originally Posted by lilring (Post 3381124)
AJ SHINKA - The Borla Tips are 4"

No... the AP tips are 4"

@!!narotordo 01-09-2010 03:18 AM

^I thought the AP tips are over 4"

AJ's Shinka 01-09-2010 03:51 AM


Originally Posted by lilring (Post 3381124)
AJ SHINKA - The Borla Tips are 4"

Negative lilring, I'm referring to the 2.25 pipes that come out of the mufler before the tips.

This quote is from the Borla website on the Rx8 Catback...Borla link

"Borla incorporates a single 3” mandrel bent inlet pipe leading to a 19” long, 10” wide transverse flow muffler. Exiting the muffler are two 2.25” tailpipe tip assemblies"

Cheers

lilring 01-09-2010 11:17 AM

Ohh the way that you wordered it before it seemed like your were talking about the tips alone and not the pipeing. Because the tips them selfs are 4 inches

AJ's Shinka 01-09-2010 07:52 PM

No worries, I was just pointing out how a lot of exhaust systems seem like 3 inches all the way through but really aren't.

OP: How's the Borla? Any pics or videos?

ZachLegend 01-18-2010 02:58 PM

I LOOOOVe my Borla, sounds amazing. Sounds even better now that its paired with an RP Supercat.

Shijin-Kun 01-22-2010 06:50 PM

i got my borla exhaust installed ( still have my cat on) at idle it has a nice purr to it. At low rpm/take off it has a nice deep sound. At WOT the best was to describe it is like an exotic car. I love it.

alz0rz 01-22-2010 06:51 PM

Borla for sure.


All times are GMT -5. The time now is 09:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands