2006 CAI Fitment Question
i have an 06 -rx8 and am looking to get the mazdaspeed cai but everywhere ive looked says ##-05 models...as far as i know...nothing changed in terms of the intake so will this part fit an 06?
|
Yes, it will fit the '06.
|
i don't see why it wouldn't fit. it's just that the ms cai came out around the same time as the 2006 cars (i think).
|
well the aem is somewhat similiar to the mazdaspeed and the intake for the 04-05 rx8 AEM makes WON'T fit an 06... so I would write them an e-mail to find out for sure.
|
the aem intake was also out quite a while before the 2006 rx8s. it's just has not been updated/tested to see if it fits/works the same as the older models. i'm pretty sure it'd fit.
|
It might fit, I remeber awhile ago AEM was on the site lookiing for a 06 to see if it will fit.
|
Here https://www.rx8club.com/showthread.p...&highlight=aem you can ask the aem guy how the test went.
|
Originally Posted by SE3PSynergy
well the aem is somewhat similiar to the mazdaspeed and the intake for the 04-05 rx8 AEM makes WON'T fit an 06... so I would write them an e-mail to find out for sure.
I know 1 thing for sure. The 06 oil line doesnt vent back to the intake like the 04/05 models do. Maybe thats why they don't fit on a 06. I'm sure you could just plug that hole with a bolt and put a breather filter over it to hide the bolt or something along that line. Besides that I dont know what else could of changed. |
Good point Trekk.
The oil breather line is directed further up the intake port. |
so what options do i have for an intake for an 06?
|
If you cap the oil breather line on the CAI, it should work fine. (Based on shape and movement of the oil breather line higher in the intake port.)
|
way too much work for me..ill just try and locate one for an 06
|
All times are GMT -5. The time now is 07:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands