bootslxa |
04-28-2012 12:06 AM |
Don't know if you found one yet or not but thought I'd let you know that this happened to me on the driver side. I bought a long bolt and lock nut of approximately the same size. I burned the plastic a bit and pulled the stud out, epoxy'd my own in and voila. I will say that this was purely an experiment that I thought would fail but it worked well enough. I put some blue rtv gasket sealer around the gasket as well. It doesn't look pretty if you take it off and look at it but if I find someone inspecting the inside of my driver side taillight I might have some words for him/her.
|