Any good shops around Raleigh NC Area
I will be needing a new engine soon. Any good rotary shops around Raleigh NC area?
|
bump
|
you could check joe performance if you are anywhere close to fayetteville
|
has he worked on your car? Does he rebuild engines too?
|
he works on all types of RE! he didnt work on mine yet its been over 5 years since I busted mine, but he has rebuild other renesis. ill PM you his number if you want
|
Originally Posted by pr_soldier
(Post 4223386)
he works on all types of RE! he didnt work on mine yet its been over 5 years since I busted mine, but he has rebuild other renesis. ill PM you his number if you want
|
Found a great rotary mechanic in Roanoke Rapids NC.
Got his contact info from some members from rx7club.com Guy knows his stuff!!! He had like 7 FD park outside. One had a 3 rotor!! His FD was hotness. Im taking my 8 next month to get a rebuild....... it will be reborn!! |
So my mechanic is super busy and I need someone to check my 8 to get it inspected since its failing because its trowing an engine code. Anyone in the Raleigh area?
|
i work on rx7 and rx8 cars have been building motors since 96 just got done building a motor for a 2004 rx8 and all went fine.im low cost and easy to work with im less than 2 hours east of you
also i have built motors for enduro racecars running in 24hr and 14hr races at daytona sebring vir road atlanta etc i have had very few motor failures out of about 15 events from 4 different teams i built motors for.and i have there contact info to back me up if needed for reference.and just to make it clear most the motor failures were driver error or overheat issues at track not motor assembly but stuff happens to motors when pushed hard for hours and hours.we had one motor last 4 24hr races before water seal went.i have probly rebuilt 40 plus motors over the years i was going to make a post on here letting people know i can rebuild there rx8 motor if they were in need of someone but not sure if that is allowed on here.i charge 400 to take block apart and reassemble.im kinda picky on the internalls used though i mainly stick with atkins heat treated apex seals and everything else just stock unless you want more heat treated stuff just comes down to cost and upgrade the oil system a little unless you got a 09 up car.i charge 800 to remove and reinstall motor. |
Where are you located?
|
washington nc zip 27889 near greenville nc my email is usedcarpartss@aol.com my ebay member name is mazdaracecar im known on there by most
|
wow I was there last week. its only 1 hour away. Ill email you.
|
Originally Posted by Novoken
(Post 4454401)
wow I was there last week. its only 1 hour away. Ill email you.
|
I think i need a new motor or a rebuild. I'm in the raleigh area too.
|
Originally Posted by C-PHLAT
(Post 4469707)
I think i need a new motor or a rebuild. I'm in the raleigh area too.
|
Originally Posted by coolcars44
(Post 4454162)
i work on rx7 and rx8 cars have been building motors since 96 just got done building a motor for a 2004 rx8 and all went fine.im low cost and easy to work with im less than 2 hours east of you
also i have built motors for enduro racecars running in 24hr and 14hr races at daytona sebring vir road atlanta etc i have had very few motor failures out of about 15 events from 4 different teams i built motors for.and i have there contact info to back me up if needed for reference.and just to make it clear most the motor failures were driver error or overheat issues at track not motor assembly but stuff happens to motors when pushed hard for hours and hours.we had one motor last 4 24hr races before water seal went.i have probly rebuilt 40 plus motors over the years i was going to make a post on here letting people know i can rebuild there rx8 motor if they were in need of someone but not sure if that is allowed on here.i charge 400 to take block apart and reassemble.im kinda picky on the internalls used though i mainly stick with atkins heat treated apex seals and everything else just stock unless you want more heat treated stuff just comes down to cost and upgrade the oil system a little unless you got a 09 up car.i charge 800 to remove and reinstall motor. |
Rx8 mechanic in nc can you send his # ?
Can you pm me his info please ?
Originally Posted by Novoken
(Post 4226682)
Found a great rotary mechanic in Roanoke Rapids NC.
Got his contact info from some members from rx7club.com Guy knows his stuff!!! He had like 7 FD park outside. One had a 3 rotor!! His FD was hotness. Im taking my 8 next month to get a rebuild....... it will be reborn!! |
Talk to Joey at HRT Performance. He is plugged in to the rotary heads in the triangle.
|
Originally Posted by coolcars44
(Post 4454162)
i work on rx7 and rx8 cars have been building motors since 96 just got done building a motor for a 2004 rx8 and all went fine.im low cost and easy to work with im less than 2 hours east of you
also i have built motors for enduro racecars running in 24hr and 14hr races at daytona sebring vir road atlanta etc i have had very few motor failures out of about 15 events from 4 different teams i built motors for.and i have there contact info to back me up if needed for reference.and just to make it clear most the motor failures were driver error or overheat issues at track not motor assembly but stuff happens to motors when pushed hard for hours and hours.we had one motor last 4 24hr races before water seal went.i have probly rebuilt 40 plus motors over the years i was going to make a post on here letting people know i can rebuild there rx8 motor if they were in need of someone but not sure if that is allowed on here.i charge 400 to take block apart and reassemble.im kinda picky on the internalls used though i mainly stick with atkins heat treated apex seals and everything else just stock unless you want more heat treated stuff just comes down to cost and upgrade the oil system a little unless you got a 09 up car.i charge 800 to remove and reinstall motor. hey do you still fix rotary engines ? This my number 252 624 5796 txt or call me anytime |
Looking good mechanic
Hey guys, I need a good rotary mechanic around Raleigh. My 8 died the other day and after coil, wire and plugs swap, I'm afraid I'm in need of a rebuild. I've seen the guy in Smithfield, but am wondering if he is still around in nearly 2018. Thanks, all advice helps as I miss driving my 8.
|
Grays rotary still around?
Originally Posted by Novoken
(Post 4469784)
Check with Gray's Rotary Specialist in Smithfield NC
|
I live in Durham, and the closest one to me that I've found so far is RotorSports Racing Mazda RX-7 rotary engines and performance modifications shop over near Charlotte. I've only spoken to the owner via email and a phone call, so I can't attest to their actual work. But he's plenty friendly and will give you estimates.
I've also heard good things about Rotary Resurrection over in TN, but if you've got a dead car, that's a ways to drive. In all honesty, right now, I'm leaning towards this shop when my RX-8's time comes, just because of the good things I've heard. |
Also, this post on Reddit was a good read, despite the usual crap that's on the RX8 sub.
https://www.reddit.com/r/RX8/comment...orth_carolina/ |
Thanks!
Originally Posted by 0-TO-100_Real_Quick
(Post 4847309)
I live in Durham, and the closest one to me that I've found so far is RotorSports Racing Mazda RX-7 rotary engines and performance modifications shop over near Charlotte. I've only spoken to the owner via email and a phone call, so I can't attest to their actual work. But he's plenty friendly and will give you estimates.
I've also heard good things about Rotary Resurrection over in TN, but if you've got a dead car, that's a ways to drive. In all honesty, right now, I'm leaning towards this shop when my RX-8's time comes, just because of the good things I've heard. |
Originally Posted by Harley Sutton
(Post 4847271)
I'm in the Smithfield area too. Is he still around, need help!!
I started a thread of rebuilders to help our fellow members find ones near them. If you find one not on the list, please post it there, thanks. https://www.rx8club.com/rx-8-discuss...ilders-265177/ |
All times are GMT -5. The time now is 08:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands