Zaino build up removal?
 

Ok, so i LOVE zaino...it makes the car look insanely cool.

But, the RX* has these little edges on the lower front of the fender flare on back wheel(know what i mean)...the z2 i apple seems to have made a small white build up around this in the edges...anyone have tips for removing it?

I've come to using my finger-nail, but there is still a bit stuck there. I'm not sure what the best way to get it off, without damaging anything is.

Might try a toothpick or a toothpick with a piece of cloth between it and the paint.

This was my next likely solution...as long as i'm gentle, it should be ok for the paint?

your paint isn't jello. i wouldn't worry about it

Q-tip

The build up like that means you are putting it on too thick to begin with. I had the same build up at first, and now apply it in a very thin film, like the directions say :)

It goes on very thin, but of course, it collects in the edge. I get 2 application/removals from a 2oz mix(with ZFX). Am i using too much?

Are you saying that after an application and removal of Z2 that the edge of this piece has 100% of the substance out of it's corners? I'm not saying its a HUGE build up...just a thin white edge.

Go to the store and buy a "SOFT" toothbrush and use that.
Just make sure it is the "SOFT style.
If that dont work get a Jack Hammer.