Wait, I'm having the same RPM problem with my AiM, and that's all I need from it. How to you get the RPM to work? Mine only works if I disconnect the ABS unit.
I have tried these protocol on my aim DL 2. the protocol for the 09+ provide AFR and coolant temp but the rpm numbers is out of wack, like 3x higher. rpm works fine on other protocol. currently im using the generic OBD2 protocol. they all have the brake sensor/switch option available but i haven't been able to get any data brake pressure.
I have tried these protocol on my aim DL 2. the protocol for the 09+ provide AFR and coolant temp but the rpm numbers is out of wack, like 3x higher. rpm works fine on other protocol. currently im using the generic OBD2 protocol. they all have the brake sensor/switch option available but i haven't been able to get any data brake pressure.
Are you able to adjust the math for the RPM channel? If so, I can get the parameters and formula I'm using on mine.
trackjunkie
10-03-2019 07:23 AM
Originally Posted by Mr. Pockets
(Post 4880674)
Are you able to adjust the math for the RPM channel? If so, I can get the parameters and formula I'm using on mine.
