Originally Posted by trackjunkie
(Post 4885541)
my first time at Mid Ohio this past weekend. getting some seat time in preparation for NASA national event later this year. my best was 1:40.2, was done on the second session of the day, when track condition and tires were the best
Originally Posted by trackjunkie
(Post 4885541)
i drove better later in the day after learning the track some more but track condition got worse.
|
1:25.2 at Streets of Willow Springs
|
Originally Posted by RE-Vision
(Post 4903838)
1:25.2 at Streets of Willow Springs
|
Originally Posted by Loki
(Post 4903924)
Holy sh*t. Mod list? I'm gonna update the original post.
2004 Base Sport 2,790 lbs with 1/4 tank Some motor I found out of some drift kid's car, leaks oil, decent compression Sakebomb IGN-1A Coils Off the shelf Versatuner tune Stock Intake with K&N panel, some heat shielding. Modified Alibaba header TurboXS catted midpipe. (Catless for track) 3" From collector to exit, Racing Beat exhaust. All V-band. Ron Davis Radiator BHR Motor Mounts SuperPro diff bushings Kaaz 1.5 diff 255 Yokohama A052 on 17x10 Konig Hypergrams Penske 7500da by Ankeny Racing Enterprises 560f 450r Diftech front upper mounts, Diftech 350z bearings on stock rear mounts. MazdaMotorsports Bar, .250 wall Racing Beat NC Rear bar. Mazda Motorsports offset delrin front upper control arm bushings Diftech offset knuckle bushings Rear bushings SuperPro Front lower is stock. -4 f, 0 toe -3.5 r, 3/16 toe in |
Thank you! All results since 2017 added to the main post. Sorry about that, hard to believe it's been almost 2 years since the last update. I haven't run at all this year, so live vicariously through your posts.
|
Originally Posted by RE-Vision
1:25.2 at Streets of Willow Springs
|
ZOMG, your rear spring rate is too high compared to the front rate!!!!
:rolleyes: :rolleyes: :rolleyes: :lol: :lol: :lol: |
Originally Posted by RE-Vision
(Post 4903838)
1:25.2 at Streets of Willow Springs
|
Looks like I never shared my SoW CCW time from last year. That was my first (and so far only) time there and had a blast.
Streets of Willow CCW - 1:27.64 -- blu3dragon -- RX-8 S1, estimated at 185rwhp and 3000lbs w/driver. S2 transmission & Diff. Race seat, harness & roll bar. APR wing & DIY splitter, Fatcat coilovers, Toyo RA1 255/40/17 tires (previously used as wets). Now that I've seen RE-Vision's lap,I need more practice, more camber, and maybe CW is faster? :-D |
Originally Posted by TeamRX8
(Post 4903939)
ZOMG, your rear spring rate is too high compared to the front rate!!!!
:rolleyes: :rolleyes: :rolleyes: :lol: :lol: :lol: |
Originally Posted by blu3dragon
(Post 4903952)
Looks like I never shared my SoW CCW time from last year. That was my first (and so far only) time there and had a blast.
Streets of Willow CCW - 1:27.64 -- blu3dragon -- RX-8 S1, estimated at 185rwhp and 3000lbs w/driver. S2 transmission & Diff. Race seat, harness & roll bar. APR wing & DIY splitter, Fatcat coilovers, Toyo RA1 255/40/17 tires (previously used as wets). https://youtu.be/6iR9GMXEBjM Now that I've seen RE-Vision's lap,I need more practice, more camber, and maybe CW is faster? :-D |
Originally Posted by RE-Vision
(Post 4903981)
yes my setup doesn't work at all i've been told by many people :smoker:
|
NCM Motorsports Park 2:20.2
Putnam Park 1:16.4 315 Yokohama A052 on all four, a bit over 2600lbs Car is built for SCCA Time Trial series. https://cimg2.ibsrv.net/gimg/www.rx8...9afdea78d.jpeg |
Car is built for SCCA Time Trials
~2700lb stock motor, lot of custom bits otherwise. Pulls a lot of G in high speed corners 315 square Yokohama A052 NCM 2:20.2 SCCA Max3 class track record, won at nationals 2019 The car in the same configuration also ran at Putnam Park 1:16.4 Next year will likely drop a few more lbs and run Hoosiers for unlimited 2. http://dallasreed.com/download/grayrx8.jpg |
Oh, nice!
|
Hit Buttonwillow CW13 this weekend. First time at this track in 4 or 5 years and the last time was just one lap in my Elantra, safe to say it's basically new to me. Got a 2:02.3, lots of little and one very big mistake to fix next time, pretty sure 2 flat or faster is achievable.
|
2:04.09 at Chuckwalla CW on Saturday. Will upload video when I can.
|
was in town for 10 days. took RX-8 i bought 2 years ago to drive at street of willow
I think i did ok 1:29.8 desptite using 6 years old Champrio GT that come with car |
nice!
|
Originally Posted by RE-Vision
nice!
How wide of A052 u are using |
Originally Posted by diyman25
(Post 4910412)
thanks , ur lap time is very fast
how wide of a052 u are using |
Here is a 1:38.1 at Gingerman
Stock engine. 315 A7s. Lot of downforce and weight reduction. |
that’s smokin’ compared to the other times posted for there :bubbrubb:
gotta watch those rev limiter hits though :suspect: edit: maybe you’re on the gas still when the clutch pedal is going in instead? |
Originally Posted by dallasreed
(Post 4918667)
Here is a 1:38.1 at Gingerman
Stock engine. 315 A7s. Lot of downforce and weight reduction. https://youtu.be/5eO-GhkbZoY |
that’s a good thing with the A7 compound, downforce and those cornering speeds are going to warm them right up imo
|
All times are GMT -5. The time now is 10:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands