RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Parts For Sale/Wanted (https://www.rx8club.com/rx-8-parts-sale-wanted-44/)
-   -   Second Phase of G3tr3ddy2gr3ddy's Partout! (https://www.rx8club.com/rx-8-parts-sale-wanted-44/second-phase-g3tr3ddy2gr3ddys-partout-190721/)

G3tR3DDY2GR3DDY 02-07-2010 09:51 AM

Second Phase of G3tr3ddy2gr3ddy's Partout!
 
Hey guys, a good portion of the aftermarket parts have sold in my other thread, now its time to start selling the rest of the car.

I will add the remaining aftermarket parts i have available just for the ease of it, but this thread is directed toward the selling of the stock used parts from my daily driver rx8 that i am parting out.

All prices are NOT including shipping and are OBO, but i will be glad to get an honest shipping quote at your request. All parts are guaranteed to be in good working condition or i will refund your cost minus shipping/replace the part no charge if available.

All parts are located in Asheville, NC 28803 and are available for pickup at any time. If i dont have the part listed, just ask i most likely have it.

The car is 2004 GT 6spd 6port with 60k miles orginally nordic green painted lexus grey.



STOCK


http://s147.photobucket.com/albums/r...lime6896/EBAY/


Motor- always ran strong never been replaced. 2500
I can sell this as a long block or a short block. short block preferred though.

Front subframe- 150
Rear subframe- 150
Differential- 300
Fuel Pump- 60
Driver airbag- 150
Pass. airbag- 250
Wheels 18" - 350
Driveshaft CF- 150
Control arms- 60 each
bose system- 200 (includes amps but no headunit)
bose headunit- 100
Calipers- 100 each
Front doors- 250 each
Rear doors- 150 each
Trunk- 200 (shaved emblems and evo-r lip)
ECU and case- 150
pwr steer. module- 150


AFTERMARKET

http://s147.photobucket.com/albums/r...96/EBAY/Other/
http://s147.photobucket.com/albums/r...6896/My%20RX8/

VIS CF TS hood- 400 (has bubble in the front middle )
Omni brake pads F+R- 75
Rmagic rear bumper- 450 (molded to stock)
Mazdaspeed front seats- 500
Polished alternator- 200 (never installed)- SOLD
OBX header- 150 SOLD
Polished coolant tank- 60 SOLD
Exedy stage 2 clutch kit- 150 (10k miles)
JVT allum. radiator- 200
Autobahn rad. hoses - 60 (blue)
Mazdaspeed shift knob- 60 SOLD
xenarc 7" touchscreen- 200
xenarc custom dash mount- 150
piano black ashtray - 100
greddy air diverter- 50 SOLD
Canzoomer- 50

t0m 02-07-2010 10:06 AM

Dibs on shift knob

JinDesu 02-07-2010 10:11 AM

I'm curious towards the MS front seats - do you have pics of those? I went through the photobucket gallery and I didn't really see them. Thanks!

G3tR3DDY2GR3DDY 02-07-2010 10:16 AM


Originally Posted by t0m (Post 3420257)
Dibs on shift knob

sold thanks


Originally Posted by JinDesu (Post 3420259)
I'm curious towards the MS front seats - do you have pics of those? I went through the photobucket gallery and I didn't really see them. Thanks!

try the second link on the aftermarket part. thanks!

NYC Drift King 02-07-2010 10:17 AM

Bro Your like a Rx8 store lmao. GL with the sales....

G3tR3DDY2GR3DDY 02-07-2010 10:18 AM

just had a lot of shiat on this car :crying:

JinDesu 02-07-2010 10:33 AM

Gotcha. Does it have power seat controls and heated seats? You have heated seat controls, so I'm guessing yes.

How did you get these? If I can find information on them online, it'll save me on asking so many questions, thanks!

tiltmode43 02-07-2010 11:06 AM

Gahhh, I've been on here literally all night distracting myself from work and I STILL missed that shift knob some how. What gives...

Paging Roger for that air diverter, if he doesn't already have one.

wb rx-8 02-07-2010 11:39 AM

ill take the greddy air diversion panel and im thinking about the touch screen. is it hard to install?

rx82hate 02-07-2010 11:44 AM

Did not see a pic of coolant tank. Dibs for model 15 pending pic.

G3tR3DDY2GR3DDY 02-07-2010 01:51 PM


Originally Posted by wb rx-8 (Post 3420314)
ill take the greddy air diversion panel and im thinking about the touch screen. is it hard to install?

not with the mount i made, just replace the panel and wire it up to a pc or whatever you are using it for. includes the cables that come with it



Originally Posted by rx82hate (Post 3420315)
Did not see a pic of coolant tank. Dibs for model 15 pending pic.

the pic is in the aftermarket pics thread i think the second one. installed in my engine bay

DJSCIASCIA 02-07-2010 02:20 PM

350 shipped for rims without tires??

shadycrew31 02-07-2010 03:16 PM

I see a pic of a flywheel int hat album but I don't see it listed. Can I assume its sold?

xl2oGel2x 02-07-2010 03:23 PM


Originally Posted by tiltmode43 (Post 3420290)
Gahhh, I've been on here literally all night distracting myself from work and I STILL missed that shift knob some how. What gives...

Paging Roger for that air diverter, if he doesn't already have one.

Damn I do want that air diverter...but saving for that Acess Port...i hope another one comes up soon.

wb rx-8 02-07-2010 03:25 PM

just sent the money for the air diverter

G3tR3DDY2GR3DDY 02-07-2010 03:28 PM


Originally Posted by DJSCIASCIA (Post 3420489)
350 shipped for rims without tires??

no thanks on the 50 less plus free shipping.


Originally Posted by shadycrew31 (Post 3420540)
I see a pic of a flywheel int hat album but I don't see it listed. Can I assume its sold?

yes you can assume that, he hasnt paid yet but i didnt see it worth putting on there yet. ill let ya know if he doesnt pay for some reason

updated

xl2oGel2x 02-07-2010 03:29 PM


Originally Posted by wb rx-8 (Post 3420549)
just sent the money for the air diverter

...heartbreaker... :sadwavey:

G3tR3DDY2GR3DDY 02-07-2010 03:32 PM


Originally Posted by JinDesu (Post 3420275)
Gotcha. Does it have power seat controls and heated seats? You have heated seat controls, so I'm guessing yes.

How did you get these? If I can find information on them online, it'll save me on asking so many questions, thanks!

Not power or heated, just manual front/side, up/down adjust. the panel was from the old interior, i changed the buttons to carpc switch :P

bought these from mazmart for 1400 sometime last winter, made the brackets and put em in. the passenger side front corner needs a new bracket made, mine wasnt good enough.

DJSCIASCIA 02-07-2010 04:45 PM

FYI u put 350 not 400 for rims.

G3tR3DDY2GR3DDY 02-07-2010 05:08 PM


Originally Posted by DJSCIASCIA (Post 3420621)
FYI u put 350 not 400 for rims.

youre right my bad, still no thanks shipping is over 100

DJSCIASCIA 02-07-2010 05:14 PM

Are they in good shape?? Curb rash?? How much is shipping to NYC.

viprez586 02-07-2010 10:11 PM

Driver side heated mirror glass? Shipped to 53045.

renesisking 02-07-2010 11:11 PM

I know this part isnt on the Aftermarket partout, but that JIC strut brace for the front...if you have it, I'll be interested in that, as well as the Mazdaspeed intake. BTW nice sub install in the truck, very clean.

fuwenxu 02-08-2010 12:46 AM

400 on hood included shipping?

realBlackSunshine 02-08-2010 07:10 AM

wish I had the money I'd take the hood and the c-spec fenders if they are for sale, not to far away either simpsonville/greenville sc. let me see if i can scrap up some cash


All times are GMT -5. The time now is 08:02 AM.


© 2024 MH Sub I, LLC dba Internet Brands