ROAR Racing for Sale List 10/10/07
 

Here are some items that we are not using anymore and thus have for sale. All items are in good, but used condition unless specifically marked as new. Prices marked do not include shipping charges.


Quantity Item Price
1 Autopower Bolt-In Roll Bar (No hardware) $300 Sale Pending
2 Racing Beat Air Boxes w/ Ram Air scoop $220 / each One Sold, Other Sale Pending
1 K&N Typhoon Intake $100 Sale Pending


22 Hoosier Koni Challenge Spec Racing Slicks (225/45 R17) $100 per 4
9 Hoosier Koni Challenge Spec Rain Slicks (225/45 R17) $100 per 4
4 OZ Ultraleggera 17"x8" wheels $400 for set Sale Pending
4 Unknown Manufacturer 17"x8" wheels $100 for set Sale Pending
4 Hoosier Koni Spec Rain Slicks already mounted on OZ Superleggera Wheels $500 for set Sale Pending


2 Stock Rear Rotors $75 / each NEW
19 Stock Front Rotors $30 / each
9 Stock Rear Rotors $25 / each
12 Hawk HT14 Front Brake Pads $140 / 4 pack NEW
4 Hawk HT10 Rear Brake Pads $130 / 4 pack NEW Sale Pending


This is just a preliminary list which will be updated as we sell items or have time to add others. If you have any specific questions feel free to post here or PM us and we will do our best to get back to you in a prompt manner.

Thank you for any interest,
The ROAR Racing Crew

UPDATE: Thanks a lot for the interest everyone, it was actually quite a bit more than we expected and so it's taking me a bit to sort through everything. I am doing my best to determine who expressed interest first in each item and contacting them before moving on. Several people have requested photos of items so I am working on that as well. If I don't get back to you soon please bear with me and I will respond as soon as I can.

Thanks,
Adam

;)

pm sent

I enjoyed watching you guys at VIR. I'm guessing the rear bumper's not available.

http://i166.photobucket.com/albums/u...7/PA062419.jpg

i am in for 1 of the racing beat air boxes and scoop. sent email for details.

pmed...

4 Unknown Manufacturer 17"x8" wheels $100 for set

have pics of the rims

interested in roll bar... dibs. give me a couple of days to figure this out because i need to make sure with someone that its okay.
-BigRed

Dibs on the intake.

Is it the 4 or 6 point roll bar?
-BigRed

for the racing beat, is it including the filter as well, or just the box and scoop? if the filter is included, I;ll the the second..

also how much shipping for the 2 fron Hawk pads

Is the K&N Typhoon Intake version 1 or 2? If it is version 2, I might be interested. Approximately how many miles are on the intake?

pics of wheels?

if the racing beat intakes aren't sold yet, i'll take one

PM Sent

dibs on the 17x8 for 100 bucks, I don't care what they look like, I'm just dying for a cheap set of spare wheels, thanks!

edit: I'll take the Kosei's if I can't have these.

interested in the superleggeras with rain slicks, is there anyway to change the rains to reg slicks?

i see 1 of the intakes has already sold. i relplied 30 min after the thread started and have not heard from you. i am out of the que?

Ok everyone, I've gotten lots of requests for pictures so I took some pictures of some things, and I've got a list of people in line for parts so that everyone knows where they stand.

Pictures first:

Kosei Wheels

http://i219.photobucket.com/albums/c...forSale001.jpg

Ultraleggeras: NOTE I forgot that 2 were one finish and 2 were the other. We are still going to try to sell all 4 as a set first, then if noone will take it we will sell in pairs.

http://i219.photobucket.com/albums/c...forSale016.jpg

Unkown Manufacturer Wheels:

http://i219.photobucket.com/albums/c...forSale003.jpg

K&N Air Intake:

http://i219.photobucket.com/albums/c...forSale018.jpg
http://i219.photobucket.com/albums/c...forSale017.jpg


Ok and now for the list of people; the list is in the order I received inquiries (either by posting/pm/email) and the people first in line will have first right of refusal, then I will go down the line in order. I am leaving peoples names off the list who were first in line and have either already paid or have told us they are 100% buying the item.

Racing Beat Air Box (1 has already sold)
scats
SBZRO
danielk015
gr8rx
r0tor
savedsoul

K&N Typhoon - note, we may have a second one for sale
RX8_Fanatic
Alano

OZ Wheels (Ultraleggeras)
Indy_8
swoope
chrism

(Superleggeras w/ Rain Slicks mounted)
Big Red - it will cost about $60 to mount dry slicks on these wheels, $30 to just dismount

Unkown wheels
tommy04rx8
canaryrx8

Roll Bar (it is a 4 point)
Big Red



Also, I am told that all of our wheels are between 38 mm and 40mm offset.

And again I am sorry if I am seeming a bit slow on responses; I am trying to get the cars ready for this weekend as well as loading the trailer to leave about 6 am tomorrow for Birmingham. I will try and get as much done tonight as I can as communication will be an issue this weekend.

Thanks for everyone's patience.

Adam

good luck on the next race. i seen you guys at VIR this past weekend and that was an awesome race.

You think Rob will ok a "Work for Credit" program? :)

If I don't see you before Adam, have a great Holiday and see you at Daytona.

PMed

i am still interested in the roll cage, but not in the wheels anymore :(. I can buy the cage, bu I want to make sure that my seat can go all the way back with it. I am 6'8", so its crucial that it does. Also, does it come welded with the race harness adapter on?
-BigRed

looks like i need to bribe a lot of people... lol

That's fine about the wheels. We will probably dismount them because the wheels will probably sell faster by themselves anyway.

As far as the roll bar, we've never had it installed with the stock seats, only with Sparco Evo L seats on sliders. My father, brother, and I are all 6'3" so we know about making sure seats go all the way back, but 6'8" is still a big difference. I think we still had a little bit of room left between the back of the seat and the roll bar with the sliders set all the way back. I can't be real exact now that the roll bar is out and stock seats back in, sadly. We used 6-point Sparco racing harnesses with the shoulder straps wrapped around the horizontal bar.

Here is a picture of it, the only bolts missing are the ones to mount it to the car, a total of 16 bolts. The camera mount is not included, however. :)

http://i219.photobucket.com/albums/c...forSale036.jpg

how much extra for the camera stand :)? Do you think that this will be okay used as a daily driver, if i dont care about the back seats? Be honest, do you think I can take it? Looks nice though... Did it come black?