GReddy/BNR Turbo Kit, Cobb AccessPort v2, AT Injectors
 

TURBO KIT IS SOLD

INJECTORS STILL AVAILABLE

I'm REW swapping my car, so I'm selling my GReddy turbo kit with the upgraded BNR turbo. It is in good shape with no end play on the turbo and all the regular GReddy fixes have been done to it. I bought it used, so a lot of it has been poorly painted black which doesn't look awesome but a little bit of time with some paint stripper should get it nice and shiny again. The kit is also modified for a blowoff valve which is included. It also doesn't have the GReddy AirINX intake portion, but does include a complete AEM cold air intake, most of which is used to replace the GReddy intake, plus the piping and intercooler brackets are modified to fit the AEM filter up front.

When I bought it, the manifold had a crack in the usual place, but I repaired it by cutting away the stress risers around the crack and generously filling it with silicon bronze filler plus I added a flex section to my midpipe to take some load off of it and it has held up great through a dyno session and a bunch of driving. I also tapped a hole in the exhaust manifold for an EGT probe as well as one in the intake pipe for a GM IAT sensor, but both of these can be easily plugged with pipe plugs if those aren't being used.

This kit does not include the GReddy eManage and I was tuning with an AccessPort which I will also no longer need and is available separately for $350. (SOLD)

I also have a set of 4 blue auto trans injectors which I was using in the P2 and secondary positions with yellows in the P1 position which are also available for $130.

I am willing to ship all of these things at the buyer's cost.

Summary:

GReddy turbo kit: $2700 (SOLD)
+ BNR upgrade
+ AEM CAI
+ Blowoff valve
+ Almost enough t-bolt clamps for every connection

https://lh3.googleusercontent.com/LV...0wU0Dg=w800-no https://lh3.googleusercontent.com/pA...xQlhQb=w800-no

https://lh3.googleusercontent.com/XW...yC5uaK=w800-no https://lh3.googleusercontent.com/Qr...EMPcUW=w800-no

https://lh3.googleusercontent.com/UT...-vt2yg=w800-no https://lh3.googleusercontent.com/Tx...MC13BK=w800-no

https://lh3.googleusercontent.com/VV...Me6o7L=w800-no https://lh3.googleusercontent.com/5v..._8ij1K=w800-no

https://lh3.googleusercontent.com/f1...naM6pL=w800-no

Cobb AccessPort v2: SOLD

https://lh3.googleusercontent.com/Jr...c5Snbx=w800-no

Set of 4 blue AT injectors: $130

https://lh3.googleusercontent.com/QT...upr6b4=w800-no

sub'd in case i can manage to save my paychecks

PM sent.

PM'ed

AccessPort is sold!

How many miles on the BNR upgrade? This has the water cooled bearing housing correct?

I don't know how many miles the previous owner put on the turbo, but I put less than 500 on it. It appears to be in great condition with no noticeable end play. And yes, it does have the water cooled center housing.

Turbo kit is still available. Feel free to make offers!

Price drop! $2700 for the turbo kit

Can you post more photos?

PM sent