Desperately need oil feed for Greddy turbo
Greeting,
I am in the middle of my turbo install and noticed the other day my kit does not have either of the oil lines. I have most of my engine tore apart and really dont want to put it back together just because I dont have the oil lines and to get one from Greddy said it will take about 8 weeks. The shop I went too, (thinking the line was universal) said that Greddy has their own thread pattern and nothing will work besides a Greddy. Im asking, does anyone still have theirs that they dont need cause they went with the MM upgrade? If anyone has one that they want to sell and can send it over night, (My expense of course) I would appreciate it! Thanks! Adam |
Today is your lucky day. I just so happen to have mine still. Send me a PM I can ship it tomorrow.
|
Originally Posted by chickenwafer
(Post 3031647)
Today is your lucky day. I just so happen to have mine still. Send me a PM I can ship it tomorrow.
super hero for the WIN! beers :beer: |
Problem solved, thank you!
|
My good deed is done for the year, lol
|
before this thread gets killed I got a question. why do you need the oil line for the BNR turbo I thought it was totally water cooled.
|
/\ water cooled yes - water lubricated ............... no
|
All turbos require oil, because all turbos have bearings. Bearing need oil or they burn up. Oil is for lubrication, water is for cooling (like an engine).
|
boy i fills like teh dummy.
|
o lol, congrats get that car running now i need to see what a turbo 8 feels like while i wait for mine to come in.
|
Ok, well back in the same situation. The oil feed I purchased has a giant leak at the crush fitting above the nut at the turbo. Does anyone else have a line that not broken? Still not sure where I can find a new one and I dont want to take the turbo apart change out the fitting. ANy help??
|
any pic of the oil feed is like?
i might have one but not sure if it is right!?! |
Originally Posted by c41250n
(Post 3148124)
any pic of the oil feed is like?
i might have one but not sure if it is right!?! |
adam im pretty sure the thread is nothing special, im not on my computer rite now but i had the fitting sizes saved
|
ATP Turbo sells them, they are just AN-6 end hose, but I can't get ATP's site to display a price, you'll need to phone....
|
Originally Posted by gregs
(Post 3148542)
adam im pretty sure the thread is nothing special, im not on my computer rite now but i had the fitting sizes saved
|
for the oil feed to the turbo, there is a tube adapter that has two bolts. It is just a tube that the SS line slips over with a fitting. I dont think there are any threads other than the two little bolts holding the tube adapter to the turbo core.
Is it leaking at that gasket or from the SS line? |
Its leaking like an inch above the nut that is screwed onto the turbo. Theres the nut on the bottom of the line, then a skinny pole, then that looks like its all held on with a crush fitting. Its leaking below that crush fitting where the pole is inserted. If that makes sense.....
|
All times are GMT -5. The time now is 07:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands