Sold
3 Attachment(s)
SOLD SOLD
For sale is a Defi BF set up. My battery was out of the car so forgive pics without lights on. Gauges are the white model (white numbers, red needle) It is oil pressure reading in KPA, oil temp and water temp reading in Celsius. I have included everything you need to install on a Series 2. Oil sensors go in the driver side oil cooler with banjo bolts. BF control unit is obviously included and you can run multiple other gauges as well. Gauge faces have some very light surface scratches, but not noticeable when car is on. Also water temp connector is lose so some hot glue holds in in place (ugly but also not noticeable when installed) SOLD Thanks guys! |
Could you do 350 shipped for the ignition?
|
Originally Posted by Th1nk_f4st
(Post 4867253)
Could you do 350 shipped for the ignition?
|
Originally Posted by 300zxsteve
(Post 4867254)
what is your zip?
|
Thanks for the ignition 300zxsteve, I cant wait to bolt it in and fire her up!
|
Originally Posted by Th1nk_f4st
(Post 4867276)
Thanks for the ignition 300zxsteve, I cant wait to bolt it in and fire her up!
|
will the gauges come with the install? Im in pa, and make a mean pasta! lol
|
Originally Posted by skippy1999
(Post 4867438)
will the gauges come with the install? Im in pa, and make a mean pasta! lol
Its actually a very easy install. I even did it without draining the fluids (some towels were needed though) For the most part, you remove the battery and its box for the coolant temp sensor. For oil sensors, you remove the driver side wheel, some clips for the well trim. The wires run through driver side firewall. Tap the fuse box for power/constant. |
Someone PM'ed a good question regarding gauge size. These are 60 MM gauges and will either need to be mounted like mine, or on a the a pillar.
They will not fit the Racing beat pod. Also for those who dont know, these have warning alarms you can set. |
Buy with confidence! Steve shipped very quickly and was a delight to work with during the purchase process!
|
Originally Posted by Th1nk_f4st
(Post 4867518)
Buy with confidence! Steve shipped very quickly and was a delight to work with during the purchase process!
Thanks! |
Bump ttt
|
What’s the figment like for the RB Headers ? Did you have to remove motor mounta or was it a straight forward plug and play install ? |
You do have to remove the motor mount but its very easy. Once the car is jacked up, you just use a piece of wood on top of a jack and brace the engine with wood under the oil pan. With the wheel pulled off the motor mount is easy to access. 3 bolts hold the brace for it, and mount is 2 bolts on the k member. Racing beat has the instructions online, but you almost dont even need them. |
Still got the gauges? If so, price? |
Originally Posted by Gabriel Washel
(Post 4870173)
Still got the gauges? If so, price? Thanks |
Is the racing beat header still available?
|
Originally Posted by NorthShoreRotary
(Post 4870833)
Is the racing beat header still available?
|
Originally Posted by 300zxsteve
(Post 4870837)
Yes it is.
|
Originally Posted by NorthShoreRotary
(Post 4870839)
Are you flexible at all on the price/shipping/etc.?
The price is good. |
Originally Posted by 300zxsteve
(Post 4870845)
Not really. I spent nearly $600 to get it a few months ago. It has maybe 500 miles on it. The price is good. Any particular reason it looks like it has significantly more than 500 miles on it? I get it, it's exhaust, and next to impossible to keep clean, but that must have been a very spirited 500 miles! Could you please let me know what the shipping would cost? Shipping to zip 60076. Thanks! |
Originally Posted by NorthShoreRotary
(Post 4870848)
Perfectly understandable - you never know unless you ask. Right?
Any particular reason it looks like it has significantly more than 500 miles on it? I get it, it's exhaust, and next to impossible to keep clean, but that must have been a very spirited 500 miles! Could you please let me know what the shipping would cost? Shipping to zip 60076. Thanks! I have no idea why it looked liked that after such a quick time, but there's not rust or anything actually problematic. I have the receipt showing date of purchase and I only put about 2000 miles on my car the entire time I owned it. I honestly think its even less than 500 miles. Anywho, shipping would be $50. PM me if you'd like it. Thanks! |
bump ttt
|
bump ttt
|
bump ttt
|
All times are GMT -5. The time now is 02:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands