Originally Posted by dizenman
(Post 4456390)
Do you have the lower intake manifold? Shipped to 92881
|
For sure, got it. Thanks though
|
Originally Posted by trinity3
(Post 4447723)
Sunvisor driver side.
Battery cover. How much for keyless entry |
How much for all of the nav parts?
|
Originally Posted by LifeAfterRx8
(Post 4456750)
How much for all of the nav parts?
|
Originally Posted by voicesinmyleg
(Post 4456301)
give me time to take everything out inside including wiring harnesses and ill get back to you.
|
I need a rear wheel bearing, my right rear is bad. How much shipped to 29150? Just trying to get the car sellable....
|
Originally Posted by 9kBeep
(Post 4457013)
Sounds good, Hate to be a pest though but how long do you think it will be until the window will be available? Obviously I'd like to get that replaced asap lol
|
Originally Posted by rithsleeper
(Post 4457177)
I need a rear wheel bearing, my right rear is bad. How much shipped to 29150? Just trying to get the car sellable....
|
I'm finding them consistently new for $60 (shipping included) so I would thing $30 would be reasonable for one that is used. I don't see this as a common part to buy used so if you want I can buy both rears for $50 shipped so if my other goes bad I have the spare.
|
Originally Posted by rithsleeper
(Post 4457904)
I'm finding them consistently new for $60 (shipping included) so I would thing $30 would be reasonable for one that is used. I don't see this as a common part to buy used so if you want I can buy both rears for $50 shipped so if my other goes bad I have the spare.
|
By time you mean a week or so? I'm looking to try selling beginning of may. What would the charge on an assembly charge? Seems like it would be a lot more than a bearing. I'm trying to cut down on cost considering it won't add any value to the car but just be one less thing I have to list as wrong with it. Let me know if you have a price or a time frame. I really don't need the assembly but ill look into what it takes to get the whole thing off.
|
Exhaust shrouds shipped to 08816 ? Thanks!
|
Hey I have a couple of things i need the Ignition coil ground plate if you still have it, and drivers side window motor and regulator and passenger side visor if it hasnt been snapped up yet. Shipping APO 09603 thanks
|
Originally Posted by rithsleeper
(Post 4458392)
By time you mean a week or so? I'm looking to try selling beginning of may. What would the charge on an assembly charge? Seems like it would be a lot more than a bearing. I'm trying to cut down on cost considering it won't add any value to the car but just be one less thing I have to list as wrong with it. Let me know if you have a price or a time frame. I really don't need the assembly but ill look into what it takes to get the whole thing off.
|
price for both key cards?
Do you have stock yellow injectors? front Undertray and wheelwell liners? |
Sold both key cards and tray and wheel wells let me see if I still have the injectors. 50 shipping included?
|
Originally Posted by voicesinmyleg
(Post 4458479)
I don't know about price. But if anything 2-3 weeks. Im going to take out whatever I want to sell and in 2-3 weeks I will be either selling the car whole sale to a person or scrapping it. I'd like 70 plus shipping
I appriciate the responses. |
arg. I missed out on the keycards. If you still have the injectors pm me. Price sounds good to me
|
Looks like I have the weekend cut out for me!
|
Originally Posted by Papa Woods 21
(Post 4458402)
Exhaust shrouds shipped to 08816 ? Thanks!
|
Originally Posted by rithsleeper
(Post 4458673)
I think I could do 70+ shipping but only if you can help me with two conditions: 1 is the shipping and part don't exceed $100, and you can get it to me before may about may 6th. The deadline may be flexable but that is how my timeline is looking. In the meantime keep me posted what you decide and I'm going to look for another assembly also and ill let you know if I find one.
I appriciate the responses. |
ĪBump
|
Bump!
|
Bump
|
Looking for the top center console
|
Pmed
|
Didn't get anything...
|
Originally Posted by greekunit690
(Post 4464600)
Didn't get anything...
|
Looking for the top center dash panel if its still available
|
I'm holding it for a person looking at the entire car today
|
Originally Posted by voicesinmyleg
(Post 4466460)
I'm holding it for a person looking at the entire car today
|
Will do. And I'll close this thread afterwards.
|
I'm repairing the front end of a 2005.... do you still have the headlights??? and/or front bumper?
|
This thread is closed
I still have the turbo kit for sale however |
how much for fogs?
|
Did you sell the car already, if you didn't and still have the driver side window i am in need of one,call me at 470-7987618 to see if i can get it with the motor if posible for a good price..txs..Jaime
|
I sold the car the turbo kit is up for sale
|
How much you want for the turbo kit?
|
4k but I'm taking offers as I see them.
|
Have you sold the dirver's side window motor?
|
Originally Posted by voicesinmyleg
(Post 4446785)
Text 2406209599 for more information.
Click on 2008 Mazda RX8 Turbo/partout for pictures or text. Have 2008 Mazda RX-8 Highly modified however has blown apex seal. Contacted Pettit racing and determined that it might not need rotor housing because of the low miles (39000mi) Able to Part out which includes but not limited to: Electric Leather Seats(Rare Black and Red set up) Heated Seats Full working heat and AC GPS Navigation with CD(most people lose those because they try to play DVDs which won't work) Auto Diming Rearview mirror Cruise control Keyless Entry with Remote start(you dont have to put the key in the ignition to turn on) Foglights 4 doors to for ease of access Sun roof Work done on it includes: Esmeril Racing turbo kit:4299 ->4500 which includes the upgraded T4 billet/ball bearing Tubonetics turbocharger GoFastBits GForce: 296->175 Braille Racing Battery B2015: 210->200 Borla Catback: 878->750 Agency power dual resonated catdelete pipe:240->200 Agency power underdrive crank pulley: 160->100 Racing Beat gauge cluster:485-400 Cobb Accessport:495->400 (Tune using this!) Hawk brakepads HPS(front and rear brand new off the box)-151 (Bought two sets. First set installed 2011) BHR ignition coils->500 (sorry no discount for those since theyre pretty much top of the line) Bosch 1600cc secondary injectors:250-200 I'll throw in spare parts from the build to include: Racing beat sparkwires OEM exhaust header Engine cover Car cover Heat wrap Cold side piping and couplers **Does not run, can start up but due to the low compression, will not run. So you will need a tow** TEXT 2406209599 for address or questions just started facebook page. https://www.facebook.com/2008Rx8PartOut |
Sold the car
|
Factory LSD with or without housing, shipped to 23224. I could potentially meet you, as I live in Richmond. Thanks!
|
Hey. Looking for three solenoids from air,ssv, and vfad. The three that are attached to the oil filler pipe.
|
How much for all three? How much for just one?
|
Noooooo! Its sold. I fear i will have to pay the dealers wretched price.
|
All times are GMT -5. The time now is 10:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands