it shows a little wear on the left side but not too bad. pm me your email or cel and i can get you some pics

I need the screws that go under the rear hood seal, through the cowl grill into the cowl.

https://cimg7.ibsrv.net/gimg/www.rx8...302e57526c.jpg
https://cimg6.ibsrv.net/gimg/www.rx8...f61391eb7b.jpg
https://cimg2.ibsrv.net/gimg/www.rx8...56512303a2.jpg
Either a Philips or JIS head (the only one I have is in rough shape). I know it's a pretty trivial thing, but I can not find this oddball little guy anywhere.

https://cimg7.ibsrv.net/gimg/www.rx8...004da9e37.jpeg
https://cimg8.ibsrv.net/gimg/www.rx8...1be9a64ee.jpeg
https://cimg9.ibsrv.net/gimg/www.rx8...f93c1b8c0.jpeg
Hi,

Looking for these retaining brackets. Where the bumper meets the driver and passenger fender. And also the seal plate where the bumper meet the hood. Shipped to 02171.

thanks!

Do you have the passenger dashboard trim still available?

Hey, would I be able to purchase that large center foam bar on the front and the front plastic fender liners with the venting?

Do you have a mid pipe installed on it?

I’m looking for an oil metering pump. Would that be something that is available?

^^the 2009+ S2 “oil metering pumps” are entirely different than 2004-2008 S1 oil metering pump and not compatible at all.

pretty sure that you’re barking up the wrong tree.
.

Yea I was trying to find something quick and that completely skipped my mind. Thanks for looking out though. Do you know if the positioning sensor on it is the same? That is the only part I need. I just can’t seem to find it anywhere so I basically have to buy a whole pump from the looks of it.

no, entirely different design on 2009+ S2. You need a 2004-2008 S1 OMP with position sensor

by any chance is the transmission still available?

I'd be interested in the headlamps!

they are sold unfortunately

I just bought 09 R3 that's a bit of a basket case. Among other things it's been living in humid Hawaii and both front and rear sub frames (basically any steel suspension components) are badly rusty.

I don't need the wheels and tires but I might be interested in a whole mess of other undercarriage stuff If you're willing to load up a pallet and let me pay freight.

If that's too hard we can talk about individual control arms and such, but I really haven't started tearing things down yet.

Anybody grabbed suspension bits yet? This is all of course assuming that your parts are in better shape than mine... Which given winters in Wisconsin I probably shouldn't assume... Anyways, please let me know

-Joel
https://cimg9.ibsrv.net/gimg/www.rx8...a6d955a509.jpg

Checking in for a response. Also looking for the ashtray cover.

Are the sways available? If so what color dot

Is the aux port in the center console available?

Looking for the full dash HVAC, Dash harness and any harnesses associated with the HVAC.

Do you still have the lower intake? If so how much?

Txs

Is the trans, differential, and driveshaft still available?

Is the bottom oil pan still available?

Hey @jatmon are you still part in this thing out? Still interested in suspension goodies but it doesn't look like you've replied here in a little over a month.

Let me know if you have the following parts:
1) The plastic trim bit through which the red light for the driver side door controls shines through
2) Driver side mirror
3) The plastic thing that the rear aux and 12V outlet poke through
4) Battery cover
5) Fuse box cover
6) Screws and anchor thing which hold the battery down
7) Engine cover
8) Boot trim plastic clips 6x
9) Keyless start knob
10) Rear view mirror (if auto-dimming)
11) Push button for the hand brake
12) Fan blower motor assembly
13) Glovebox damper and damper anchor
14) Vinyl trim on the roof

Hi Jatmon,
I have posted 10-08-22 In the section New Member Forum
Under rx-8 Assembled gear shifter wanted I have added the pictures of the gearbox and the part I need.
Please have a look at it.
It would be great if you have it or could get it later.
Thank you for your help
Bernard11

what year is your rx8?