RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Multimedia/Photo Gallery (https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/)
-   -   Did a spirited run up HWY 1 in Northern MN (https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/did-spirited-run-up-hwy-1-northern-mn-266455/)

Prophet 10-09-2017 07:33 PM

Did a spirited run up HWY 1 in Northern MN
 
https://youtu.be/8tR3h-5e0E4

wannawankel 10-09-2017 08:52 PM

I miss the old Hwy 1 before they straightened it.

REDRX3RX8 10-09-2017 09:05 PM

That's my kind of fun, but how can you stand that bearing noise, and the clunk, clunk, clunk of maybe front shocks or suspension.

Prophet 10-09-2017 09:08 PM

I think the cluck was the mount I used. No noise till I played the vid. Not sure what bearing noise you are talking about. There is a buzz in the high end that I traced to the child seat latch on the rear deck. Tightened it and the buzz went away. Also, the road is NOT smooth. It's pretty rough in a lot of spots.

wannawankel 10-10-2017 02:02 PM

Hwy 1 was never smooth. Winter takes care of summer construction.

Prophet 10-11-2017 10:12 PM


Originally Posted by wannawankel (Post 4839325)
Hwy 1 was never smooth. Winter takes care of summer construction.

I know. I work in road work, striping to be exact. So, very familiar with the road problems in the state.

Despite being pretty rough, it's still one of the better roads in the state as far as the fun factor. There is also a really narrow and twisty section of 38 north of Grand Rapids. I did work on the section past that this year and MNDOT said the twisty section in the woods is getting redone next year. Should be a fun one to hit.

REDRX3RX8 10-15-2017 01:50 PM


Originally Posted by Prophet (Post 4839241)
I think the cluck was the mount I used. No noise till I played the vid. Not sure what bearing noise you are talking about. There is a buzz in the high end that I traced to the child seat latch on the rear deck. Tightened it and the buzz went away. Also, the road is NOT smooth. It's pretty rough in a lot of spots.

It's that wa-wa-wa-wa-wa bearing noise that I've even heard on my car at about 50 mph.

It's somewhat normal, and if you don't hear it, it's probably not enough to be a problem.

My Handkook V12's got hard at 6 years, made some clunking noise, too, and had to get them off for some softer new Michelin pss.

I've been in habit of too much air pressure, but stay at 32 cold now to make softer.


All times are GMT -5. The time now is 10:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands