RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Discussion (https://www.rx8club.com/rx-8-discussion-3/)
-   -   Stupid Question about Engine Temp (https://www.rx8club.com/rx-8-discussion-3/stupid-question-about-engine-temp-219764/)

00RM125 07-15-2011 11:17 AM

Stupid Question about Engine Temp
 
those two lines on the engine temp gauge. have confused me since i bought the car. some have told me that i have to wait for the needle to hit those lines before driving the car so the seals can seat properly, and i have read that i can drive the car when i start it, but if i rev to high a fuel cut will occur so it doesnt rev to high untill the engine is at the right temp.

what are the lines?
which of the stories ive heard is correct.... if any?
can i drive it when the needle is under the lines?

laythor 07-15-2011 11:20 AM

drive it under 4k till temp moves into the middle

jasonrxeight 07-15-2011 05:48 PM


Originally Posted by laythor (Post 4031753)
drive it under 4k till temp moves into the middle

^this:)

MazdaManiac 07-15-2011 06:12 PM

The gauge starts to move around 130° or so and will be just under the "normal" position - just slightly to the left of center - at 170° or so.
It begins to swing up towards the middle at 230° and will peg full hot around 245° or so.

Razz1 07-15-2011 10:27 PM

What the hell is that sign?

Help wanted?

Need a job?


Mu ha ha......

monchie 07-16-2011 01:18 AM


Originally Posted by Razz1 (Post 4032337)
What the hell is that sign?

Help wanted?

Need a job?


Mu ha ha......


This is what you get when you ask some stupid questions like this...lol

00RM125 07-16-2011 10:53 AM


Originally Posted by laythor (Post 4031753)
drive it under 4k till temp moves into the middle

so its safe to drive just dont beat on it until its fully warm? awesome to know, thanks for the clarification, i hated waiting ten miniutes before moving lmao

Casey752 07-16-2011 11:01 AM

I have a question! just this morning i noticed my temp guage would jump when i get on the gas for a short stretch and then slowly return to normal after i back off. it doesnt move too much, just from slightly left of center to slightly right of center....this is the first time it has done this. anyone have any ideas?

jasonrxeight 07-16-2011 01:49 PM


Originally Posted by 00RM125 (Post 4032606)
so its safe to drive just dont beat on it until its fully warm? awesome to know, thanks for the clarification, i hated waiting ten miniutes before moving lmao

pretty much the same for all the cars not just rotary.:squint:

jasonrxeight 07-16-2011 01:49 PM


Originally Posted by Casey752 (Post 4032610)
I have a question! just this morning i noticed my temp guage would jump when i get on the gas for a short stretch and then slowly return to normal after i back off. it doesnt move too much, just from slightly left of center to slightly right of center....this is the first time it has done this. anyone have any ideas?

if not sensor problem then you might have some cooling issue.

ken-x8 07-16-2011 04:46 PM

Casey, I second Jason's comment. The temperature gauge just does not move under normal conditions. See MazdaManiac's description above. I've sat idling in 100 degree weather, AC on but not cooling because under hood temps are high, and the gauge has not budged. Never budged while moving under those temps, either.

Ken

Casey752 07-17-2011 10:35 PM

thanks guys. i reset the e-shaft sensor by switching the ignition to on and pumping the brake around 20 times untile the oil pressure guage jumped and that seems to have fixed the problem. Temp guage has been staying constant even when i drive the car hard for longer periods of time. i also noticed it was running way smoother and idled way better too. not sure why or even if this was the problem but for now it is gone.


All times are GMT -5. The time now is 11:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands