Shift Boot
 

I am thinking about buying a new shift boot from this site: Mazda RX8 2003+ shift boot - RedlineGoods leather shift boot store

I was wondering if anyone can vouch for it and also if anyone has done this and can tell me if it is an easy thing to do.

Thanks alot.

i don't know about the leather boot, but removing the old boot is pretty easy. the center console pops up, and then there are screws and the "rings" come off leaving you the boot.

44.00 ... :SHOCKED:

I payed so much more for my illuminated knob/boot combo. :banghead:


I got the combo (from a different vendor but i'm sure essentially its the same product) and its super easy to install. But to be honest, I think this combo probably comes with instructions (mine did), which will be what you should follow.

Basically there is a splitter that each heated seat cable goes into, and the combo includes a piece that you plug both seats into, and utilize one of the previous seat hookups for the illuminated shifter knob. I know I'm not explaining it well but mine came with really detailed pictures and instructions. Maybe thats why mine was so much more lol.

If you're just getting the boot its not as bad. You just unscrew the knob off, do a little console unscrewing/prying and then you slide the boot off.

Make SURE if you get the illuminated knob that you put a BIG sign taped to it when you go to a dealer NOT to rotate/twist the knob because they will break the wire that powers the light.

If you look for an online technical service manual for the RX8, it shows the steps you need to take to take apart the center console and replace the boot. I would start there.

thanks alot james. not an illuminated shifter, although i really want one.

Redline sells alot of stuff on 7 club. I know of alot of happy owners. I actually ended up with 2 sets of boots but never installed them so I just sold them. Very good stuff.

sorry it took me a while to post it, was at work. look for it in here:

M A Z D A

I ordered the shift boot. A nice black leather with dark blue stitching. Also i took the center console out just so i would know for when it gets in. It is easy. Took about 10 minutes

Awesome that sounds pretty cool. Im glad you got it going. Just make sure you're gentle when you pry the plastic piece out from where the cup holder is. If you're trying to keep the interior in ship shape I know that it scuffs and gets scratched by the screwdriver easily (mine did). I had to replace the inner shift boot that cancels out the ground noise (that I bought from some1 here actually, thx again to them) and it definitely only takes once or twice doing it to not forget, so you're all set.

I got a leather boot too. Gona install it tomorrow. : )

awesome. It is pretty easy install