RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   RX-8 Discussion (https://www.rx8club.com/rx-8-discussion-3/)
-   -   Self Leveling Headlight Issue? (https://www.rx8club.com/rx-8-discussion-3/self-leveling-headlight-issue-114952/)

289shelby 04-24-2007 04:47 PM

Self Leveling Headlight Issue?
 
I just picked up a new 06 Sport on Sunday night. When driving home, I noticed that at times the left headlight seemed to be "cut-off". By cut off, I mean that everything was illuminated out in front as you'd expect, but from about the middle of the car and off to the left there was a very distinct cut-off where the illumination stopped. Almost like being cut-off or a shadow being thrown from something inside the headlight. I only saw this when the car was going downhill over a small rise in the road....on a flat part of road lights looked normal. I don't know how the self levelers work, but one thought I had was that they were sticking or out of adjustment a bit?? Kind of hard to describe, but does anyone have any thoughts??

DarkBrew 04-24-2007 04:51 PM

The self level headlights only adjust for load not for road conditions. The sharp cut-off is a 'feature' of the lights.

289shelby 04-24-2007 05:58 PM


Originally Posted by DarkBrew
The self level headlights only adjust for load not for road conditions. The sharp cut-off is a 'feature' of the lights.

Any idea why I only see this on one half of the lighted area (left). Just looks a bit odd....

DarkBrew 04-24-2007 06:18 PM

The light looks like this

----------------------------/------------------------
---------------------------/

right side is higher.

There is an adjustment procedure in the shop manual to set initial aim.

See your dealer and don't let them tell you that they can't be adjusted.

New Yorker 04-24-2007 07:08 PM


Originally Posted by 289shelby
Any idea why I only see this on one half of the lighted area (left). Just looks a bit odd....

It's set that way on purpose—so you don't blind oncoming drivers who, of course, are approaching from you left.

puch96 04-24-2007 07:24 PM

I thought this "Z" was the "HID" signature.... :). It is normal....

dillsrotary 04-24-2007 07:26 PM


Originally Posted by New Yorker
It's set that way on purpose—so you don't blind oncoming drivers who, of course, are approaching from you left.

This is 100% correct

Rotary_Redliner 04-24-2007 11:36 PM

mines does the same... so u dont blind oncoming

Phantom Menace 04-25-2007 12:06 AM

That is by design! Its so you don't blind on comming traffic. ALL HIDs do that.

289shelby 04-25-2007 12:22 AM

Thanks everyone for the responses. Makes sense!

Spazzychaz 04-25-2007 07:46 AM

Mine is also like that.

zoned 04-25-2007 09:13 AM

it's in a Z pattern for zenon ;-)


All times are GMT -5. The time now is 06:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands