Scratched rim
I was backing out of a street parking space and because I'm used to a narrower car I skimmed the curb :banghead:. I slightly scratched the tire. Its barely noticeable but I'm still pissed.
Is there anything I can do to "repair" the scratch? thanks guys. |
Scratched the tire??? Or the rim. Going with "rim," search the forum for "curb rash." There are some threads on that. Fixes can range from ghetto through professional. There's a great thread in a BMW forum, linked in one of the threads here, with a rather complete DIY.
Ken |
thanks man, its actually both but I care less about the tire obv.
I did a few searches before posting but I guess I didn't search well enough :nono: I'll see how noticeable it is in the daylight. thanks! |
|
I have some curb rash too, now I have a question. They're painting the rim in this DIY, what color would the Mazda rims be? without having to paint the whole set. Also i plan on taking it off the car if I decide to do this and painting it either in my basement work room, or outside and putting it in the shed to dry
|
Originally Posted by RX8Sinner
(Post 2685073)
I have some curb rash too, now I have a question. They're painting the rim in this DIY, what color would the Mazda rims be? without having to paint the whole set. Also i plan on taking it off the car if I decide to do this and painting it either in my basement work room, or outside and putting it in the shed to dry
Rims color? Nobody seems to know, and if they do, they ain't sayin'. From what I've read, Sunlight Silver (plus clearcoat) seems to be close enough to be unnoticeable. If you find the Actual Mazda paint code for wheels, Please post it! |
No one can give proper advice without pictures of the damage
|
Man, I did the same thing. I'm kinda glad I have a spare rim/tire in my trunk, that way if I ever get TOO sick of looking at it. It's hardly noticeable, thank god.
|
EDIT: After some searching:
Originally Posted by ken-x8
(Post 2043791)
If you need a match for the stock silver wheels, Duplicolor TY 01602, Toyota "Lunar Mist Metallic" 1C8 is a perfect match. There are a couple of curb rash posts here that cite it. One of the RX-8 silver colors matches, but the folks who cited the Toyota paint say that it's a little thicker than Mazda touch-up and works better for this.
One of the posts citing the Toyota color describes a "poor man's" fix. Just clean the rash, sand it with fine sandpaper, and paint. I curbed a wheel a few weeks ago. Gouges were on the lip, and were pretty much radial. I cleaned the area, then sanded with #400 wetordry across the gouges. Not enough to take them all the way down; just enough to get the sharp edges off and reduce the depth a tad. Then four coats of the Toyota Duplicolor paint, brushing parallel to the gouges to fill to the bottom. Sanded between coats. After a week I polished lightly with white compound and waxed. Not perfect, but quality is about 10-0. I need to look, and know where to look, to see it. Ken |
Thanks for digging that up and reposting! For some topics searching will often make for some very discombobulated reading.
My car is Sunlight Silver and it's just not even close to the wheel's silver color. |
My recommendation is just scratch the whole thing. All my rims are scratched all the way around from curbs. Don't make any difference once it's all flat.
|
Originally Posted by RX8Sinner
(Post 2685591)
EDIT: After some searching:
Epilog to my curb rash story is that some time later I ran over some debris and bent that wheel. (What are the odds of damaging a scratched wheel rather than one of the good ones?) Had it professionally fixed at Wheel Worx for $150. Looks like new. The fixed the rash by welding in new material, machining it to the original contour, then painting. Ken |
Originally Posted by ken-x8
(Post 2686558)
Thanks for digging that out. You saved me a trip to the garage to look up the color again. :)
... |
All times are GMT -5. The time now is 01:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands