Rx8 antifreeze?
Dose a Rx8 take special antifreeze or can you just put any kind in it?
|
Green is good....just don't want to mix green and red/orange...it will sometimes turn into sludge :-(
|
Originally Posted by thebubbadog
(Post 4638712)
Dose a Rx8 take special antifreeze or can you just put any kind in it?
|
I use the Mazda FL-22 from the dealership
|
I did a ton of research on this & you can look up the thread. It was intensely technical & detailed.
So, let me save you much time, energy, and aggravation: Zerex for Asian Vehicles, Beck-Arnley, FL22 at Mazda, Peak Global LIFETIME (NOT Universal)... ..they will all work. Get the cheapest one (the Zerex for Asian Vehicles) in full strength (not prediluted 50/50), make sure you flush your old coolant completely, and have it. I am among the opinion that even the dreaded "All Makes/All Models" Prestone is fine to use in the 8, because it is silicate free, because the 8 does NOT have problematic gaskets/hoses, etc. Just make sure to use distilled water when you mix and fill your new coolant. It's far more important to run clean coolant in the 8, that's relatively fresh & not acidic, in the proper water-to-coolant ratio (I stick with 50/50 in Michigan, than the particular type of coolant, IMO (with a few exceptions, such as not using old green silicate or European formulated specialty complaints or Dexcool type coolants if you haven't gotten 100% of your old coolant out - so don't even do this). |
|
Another option is this: RAVENOL HJC - Protect FL22 Concentrate
It is made in Germany and it is fairly cheap. |
All times are GMT -5. The time now is 01:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands