Newly Revised RX-8 Service Bulletins
You have to go here and read them, then let us know what you think, they are on the top....This is big.....Please print out a copy, it makes it so much easier to get things done correctly the first time. I have driven more then 525,000 miles(total between them all) on Seven Mazda Rotary engine cars, Now I will Premix for the first time!
From what Mazda has been doing with its "TSB-MSP" and what I have read it seems like a simple and smart thing to do at this point. I have 35K on my 8 and now have also gone to the 5W30 oil at the same time. The mechanic came in the waiting room and asked why I was asking for 5W30. I said in the past seven rotary cars I ran 20W50 and had no problems. Mazda only recommend the 5W20 to meet CAFE and the rest of the world asked that you use 5W30 or higher in hot climates as I live in. I looked in the door jam and I did get the sticker too, with new flash# on it. It seems to run great as before. In the manual it recommends 5W20 but it also says in hotter climates use heavier viscosity. RX-8 Bulletins http://www.finishlineperformance.com....php?pageid=11 |
So what flash are we on now?
And what does this say about the usefulness of premix? |
Awesome!
|
paging zoom44!
|
great job.
the u flash is out. and lots of other great info.. and not big, huge!!!! but what do i know. :) beers :beer: |
Great!! I've got the symptons as described...once in a while crappy idle and sometimes the engine will die because of it. The only problem is I'm beyond the 60k mark. Any chance I'll get this TSB done for free?
|
Originally Posted by Parmer8
(Post 2352778)
Great!! I've got the symptons as described...once in a while crappy idle and sometimes the engine will die because of it. The only problem is I'm beyond the 60k mark. Any chance I'll get this TSB done for free?
|
looks like mazda is tired of replacing engines because they are all carboned up... i agree with that decision as its cheaper for them and makes the engines reliability look much better in the long run
also, the Cobb AP flashes are built off of the U flash i believe |
Hohoho ~~~~
Damn I have RB Flash .... hmm ... and I premix so .... Maybe I should just get the Mazda's *cleaning* kit and do the cleaning myself no ? |
A red line a day ...... No problems here ('05 March build). :-)
|
Is this going to be a recall or just a TSB? My warranty is long gone.
|
It looks like they will be for warranty work only. That's what it says at the bottom of the "engine cranks no start" bulletin.
|
Good night - this is MAJOR! I've been complaining about these exact symptoms for over a year and they keep giving me new engine mounts - which do nothing to solve the problem. It looks like the next time I bring it in, I will probably be looking at finally getting my problems fixed, or a new engine...
|
Originally Posted by expo1
(Post 2352979)
Is this going to be a recall or just a TSB? My warranty is long gone.
Now Im thinking, should I go flash this thing, I dont think I really need this flash cuz I premix the whole time :) I never had any engine power loss or hard to start when hot issue so .... will see what happen. |
Originally Posted by Duke15
(Post 2353112)
Good night - this is MAJOR! I've been complaining about these exact symptoms for over a year and they keep giving me new engine mounts - which do nothing to solve the problem. It looks like the next time I bring it in, I will probably be looking at finally getting my problems fixed, or a new engine...
|
For us out-of-warranty folks, I guess we're SOL. I wonder how much the dealership is going to squeeze out of me this time.
Red lining here and there and driving hard doesn't seem to solve this issue (at least for me). I bought mine new on Aug 04 with 61k miles with recently new plug, coils, wires, and cat. I am starting to look at my rpm at every stop. If it continues to dip below 725 or so, I have to blip the engine or it's going to die. |
dumb question but for this TSB would it be under the bumper to bumper warranty (which i just passed due to # of years) or the extended powertrain warranty? i'm not having these symptoms now but want to know if i should even bother worrying if it happens later and it's part of the bumper to bumper.
|
^ I interpret it as engine work... so powertrain warranty.
|
This is huge. Thanks for the info. I guess if you are still under warranty you can simple schedule an appointment with Mazda Service just to have inspection and MSP16 done...
|
As a TSB I presume needed only if you're having the cited anomalies? It would seem that the 'voluntary emission recall' a year or so back already introduced add'l seal lubrication. But I suppose a newer flash is always a good idea. Next oil change (upcoming) ....
|
I just had mazda do a refab engine last month. Would it be likely that this was already done to the car? Also for carbon build I redline once a day but bought the car used and don't know if the original driver did this, so would my refab engine negate this or does a refab not put in new parts where the carbon builds up?
|
Well, something to ask the techs to do when I go in for the first oil change, I guess! I've not had these issues, but why wait?
|
For Sushi - A refab (aka re-manufactured) engine is almost completely broken down and rebuilt, so you can be assured any carbon build up on the rotor seals was removed. It's also thoroughly tested prior to issue to service stock.
As far as this new PCM flash, you'd have to ask your dealer. At the least you've probably got the older "voluntary emission recall" flash if the former owner kept up with such recalls. |
For the milky dipstick, I know it was a revised dipstick, but how come now their roviding also a breather mod, was this always a case, had I missed this or did they just add the breather mod too? It also looks like some of theses TSBS are getting you free coils, and sparks from the stealership. The MSP16 flash mentions that its for engine problems that occur in high ambient, do you think Canadians will also be gettin the same flash?
|
Originally Posted by Huey52
(Post 2353225)
For Sushi - A refab (aka re-manufactured) engine is almost completely broken down and rebuilt, so you can be assured any carbon build up on the rotor seals was removed. It's also thoroughly tested prior to issue to service stock.
As far as this new PCM flash, you'd have to ask your dealer. At the least you've probably got the older "voluntary emission recall" flash if the former owner kept up with such recalls. |
All times are GMT -5. The time now is 12:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands