License Plate Nut/Bracket Problem
 

So I got home and I noticed my license plate was bent up bad. The left side screw and bracket some how got pulled out of the screw hole. Unfortunately, the piece to screw these back to inside the bumper is missing. The right side seems fine. Anyway I can get in there and put it back or do I need to go to the dealership?

Go buy some license plate screws at ace hardware for about a $1 and use those.

edit: wait is this front or back ?

Problem is, I've got nothing to screw the left screw into. It's the back. I don't have a front license plate.

Talked to the dealer, said it might take a couple hours, might need to take the bumper off?

yes, im sorry my first post was confusing... you can buy little peices that screws screw into they are like $1 and do not require taking the bumper off for.

http://images.truevalue.com/getimage...lorImageSize=2

the white piece from that link is what im talking about, dont let the dealer screw you trust me, my car was missing the same thing when i bought it.

Thanks - picked those up from AutoZone this morning. I am guessing that maybe these are what I was using previously - I can't recall when I screwed my license plate to it.

Just out of curiousity, do you use these for both brackets?

For both of the back ones? no i dont because i was only missing the left so i just bought one and used it for the left. (hope that answered your question :)

Haha, yea that'd worry me a bit if you had both with one of these plastic things... sounds like a recipe for a missing license plate :)

Appreciate your advice though.

haha ya np, there must be an issue with the left bracket thing, or maybe its just a coincedence *sp?*