ccd2us

So I saw the engine light come on for the first time yesterday. Despite my first reaction that Mazda had engineered another 100 HP to just appear via an idiot light at 11K miles, I was assured to have a trip to the my dealership. I figured out that it was my gas cap during my drive home from watkins glen. I was right, I tightened it and financed a new tank of 91. Anyway my engine light is still on. What to do? Can I fix? Checked the manual - no good.

expo1

Buy a new cap, its $8.00. Stant part #10838

DarkBrew

The dealer has a new part # gas cap to replace the defective one. Mine was warranty


Edit
My bad. Does not apply to 2006

http://www.finishlineperformance.com...26-07-1800.pdf

Renesis07

iTrader: (1)

if you tell your dealer why the light is on, and your for sure its your gas cap,and theres nothing wrong with you gas cap. they wont charge you anything to reset it. I know because my stupid *** has left that thing untightened three times now!!!!!!!!!!

coll3735

I've had to turn my 8 into TWO times now for what they called a bad gas cap gasket that cause my engine light to go on; thats sh*tty.

ken-x8

But if the code is P0455, it does apply to 2006.

http://www.finishlineperformance.com...01-07-1748.pdf

which pins it on the gas cap. But the gas cap may be innocent. It could be a misshapen filler pipe:

http://www.finishlineperformance.com...0-07-1809a.pdf

These codes point to evaporative system leaks, and can be triggered by things other than the gas cap. A distinctive thing about the evap codes is that the self-test occurs while the car is off, and the CEL will come on as soon as the car starts. Also, if it's just a loose cap and the cap is tightened, it will take a few cycles for the CEL to clear itself.

Ken