After market knobs on Axial Flow shifters
Yes, I searched the threads, and there must be over 30 pages on RP's shifter and shift knobs. :banghead:
I bought a MOMO F16 knob and tried it on my RP shifter. It is a tad loud.:uh: RP hisself said the reccomended knob is the stock knob. Not a shifter problem. Fair enough, but has anyone tried a Monster knob on RP's shifter? Is it relatively quiet? Anyone want a MOMO F16 CF knob for cheap? Dealer won't take it back cause I installed it.:ar: |
pic?
|
I have a voodoo knob on my AFE SS, it is loud as hell.
I love it!!!! :) |
uh... Forgive my ignorance, but how does a shift knob change the sound?
|
1 Attachment(s)
The knob in question attaches to the shifter shaft via set screws. Hence a metal to metal connection causing the knob to become sort of a sounding board or sound amplifier..think slide steel guitar (George Thorogood or Dire Straits). I'm no music expert, so I may get hammered on this.:uhh:
Anyway. The RP SS is slightly louder, I guess due to better shifter feel & less shifter isolation. Anyway, the stock knob, suggested by RP hisself, appears to have softer nylon threads, is ?leather? covered and is a heckuvalot quieter than a MOMO F16. In a perverse way, I kinda like the transmission sound, too. But........:Eyecrazy: I'd take a photo of the knob, but my right hand is in a cast, so I can barely pick my nose, let alone run a camera. I may have 2 hands tomorrow. For now: Picture of item: I see that damned little red x http://www.shopatron.com/product/par...61.19261.0.0.0 |
i didnt notice a change in sound. im using the mazdaspeed shifter.
|
What kind of knob did you put on th Mazdaspeed?
|
How much for your shifter?
|
sorry, let me rephrase. im using the mazdaspeed shift knob.
im using the axial flow short shifter. |
Hokay, Mazdaspeed knob...makes sense 'cause the stock Mazda RX8 knob is unobtrusive.
|
http://corksport.com/store/image/fht...Shift_Knob.jpg
looks like this. i find it very easy to use and very comfortable. it also never gets too hot or ridiculously cold. |
RP shifter is definitly NOT for sale. Like my guns, it will have to be pried from my cold, dead fingers! Talk to RP if you want one. :icon_tup:
I'll let the knob go for $50.00. The education in acoustics was $104.00. It wasn't even on the shifter a day. I bought because I had a MOMO Raptor on my last C5. The knob was quiet, but the B&M Ripper ended up with over a pound of lead to keep it quiet. Just two totally different cars.:mdrmed: |
before you do that.
remove the knob, then the plastic that holds the shift boot.. turn it over and pull the green felt out of the inside of the shift boot.. then reinstall with out the green felt.. let me know how that goes.. ;) beers :beer: |
Thanks for the tip. I'll try it. If it works, will you tell me why it does??:Eyecrazy:
|
Originally Posted by Speyrod
(Post 2668189)
Thanks for the tip. I'll try it. If it works, will you tell me why it does??:Eyecrazy:
let me know how it turns out. beers :beer: |
Out of all the shift knobs I've installed on the RX-8, the 99-04 OEM Miata shift knob is by far the best. It is shaped the same as the Mazdaspeed shift knob as pictured above, and it really does shift like a dream. The Voodoo type sphere knobs are nice to look at, but they lack the leverage of the tall and stubby Miata shift knob.
Something like the Momo F16 would also work better because of the leverage provided by it's height. |
Still gimping about with 2 1/2 fingers on right hand. I may take a shot at that knob tomorrow.
|
Originally Posted by swoope
(Post 2667368)
before you do that.
remove the knob, then the plastic that holds the shift boot.. turn it over and pull the green felt out of the inside of the shift boot.. then reinstall with out the green felt.. let me know how that goes.. ;) beers :beer: |
Originally Posted by climacus
(Post 2668308)
Out of all the shift knobs I've installed on the RX-8, the 99-04 OEM Miata shift knob is by far the best. It is shaped the same as the Mazdaspeed shift knob as pictured above, and it really does shift like a dream. The Voodoo type sphere knobs are nice to look at, but they lack the leverage of the tall and stubby Miata shift knob.
Something like the Momo F16 would also work better because of the leverage provided by it's height. |
To put this to bed, at least for me, my Monster Shift knob arrived. Screwed on, looks good, doesn't make any noise. Kind of plain, but I'm having fun feeling and playing with my Monster knob!:Eyecrazy:
http://www.monsterknobs.com/mazdashiftknobs.html |
Originally Posted by 05rex8
(Post 2670033)
that didn't work for me, made no difference
beers :beer: |
Originally Posted by rglbegl
(Post 2666557)
I have a voodoo knob on my AFE SS, it is loud as hell.
I love it!!!! :) |
1 Attachment(s)
With one hand available for work, I didn't want to tear that friggin' console apart, again. So, I did the quick and dirty install per Monster Knob's instructions. I'm happy.
|
^what happened?
I have the monster knob too btw....I switch between that one and my brushed aluminum one |
Scuba diving. Putting my fin on, and my finger got caught between the strap and my boot. I then yanked my hand free and dislocated finger.
|
All times are GMT -5. The time now is 01:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands