AC and Oil Cooler screens
 

I posted an earlier thread about the overspray on my car. Well, the car is completely apart and being totally repainted by the best shop in this area. The overspay had burned into the clear coat. The insurance co. is picking up the tab, no poblems. Great company. I was thinking of adding Racing Beat potective screens since the nose if off. Opinions, pros/cons? Thank you in advance.

yes you should get them

great investment for protecting those coolers and ac condenser.
I have RB units.
Hymee makes some as well. I think they're black

Has anyone picked up the ones from rx8strakes?

I was just about to order the Oil Cooler and Lower Bumper Guards from them instead for $59.98 (total). What to do, what to do? :dunno:

DEFINITELY get them. Especially if you have an 04. The screen on the 04 is much smaller than the one ones on the 05 - 08. Without the screen, all you need is one rock to hit off of the ground and your condenser is gone. A quick $500+ out of your pocket if that happens.

Went ahead and ordered them just now :icon_tup:

I got the package from RX8Strakes instead, seeing as it was roughly $40 cheaper for essentially the same thing RB has. I'll post pictures once I put them on.

You
 

should note that the RB screens are stainless steel. The stakes oil cooler screens screw on from the front for fog lighsts. The RB screens mount behind the lights, since you have to have the nose off, this seems to be a better app. Let me know how you like the strakes. Thanks

I'm waiting for the new version from RX-8Strakes, which will have the two fog-light strakes on each side, similar to the now defunct ones from DLS Customs:

https://www.rx8club.com/series-i-do-yourself-forum-73/diy-dls-customs-oil-cooler-grilles-fog-light-strakes-ac-condenser-grille-inst-56015/

http://www.rx8strakes.com/images/new.../prod_dev2.jpg

http://www.rx8strakes.com/images/new.../prod_dev3.jpg

Additional information
 

I am relatively new, and truly appreciate the great advice I have received. I noticed that many post include specs about the responders car. How is this added? Have looked at the edit page but no clue. Thanks

The Strakes version also is mounted from behind not the front.

They actually charge you $20 more if you want the front mount version that requires no bumper removal. I just chose the regular rear install since I also purchased the AC Lower bumper guard.

Didn't really pay much attention to the Stainless VS Aluminum. I'm sure I'll still be satisfied....

User CP at the Top Left of the page when your logged in. Then Signature...

Thank you
 

to all for the help. It is most appreciated!

sure no problem.

Dead thread, but worth the look. I just picked up an 04 GT and over the weekend BAM.... AC condenser took one in the face... $602.00 Later :rant:

Well I am definitely picking a set up.:banghead: :banghead:

Charlee

OUCH!!! sorry dj, that really sucks.

ouch. big rock or what? you don't have a grill on the MS bodykit?

yea, might be easier to big a big screen on the back of the MS

I tried RX8 Strakes screens and they looked wavy and cheesy. You have the front off; cowboy up and get racing Beat's screens. Easy to install and look 1000% better for an extra hundred bucks.:eyetwitch

RB Screens FTW! The only RB parts on my car :lol2:

Installed RB Screen Kit
 

Here it is installed.
Took about 1.5Hrs by myself. I am sure it will be allot faster if you have taken the bumper off before. It was my first real MOD. Its pretty straight forward. My next mod will be Racing Beat Suspension Package. Springs, and Swaybars.

http://i290.photobucket.com/albums/l...8/IMG_0065.jpg
http://i290.photobucket.com/albums/l...8/IMG_0066.jpg
http://i290.photobucket.com/albums/l...8/IMG_0067.jpg
http://i290.photobucket.com/albums/l...8/IMG_0068.jpg

Bad luck! :(

For sure.:eyetwitch