|
2005 rx8 (manual) mods??
so i have a 2005 rx8 and was wondering what kind of mods can i do to upgrade it. i have headers, injen CAI, stage 2 clutch, flywheel, pulleys and i have a full greddy exhaust on the way. i already no i can turbo it or supercharge it but i am leaving that for a while later.
please tell me what other mods i can do and links onto where i can buy them and how much gain. im also looking for a short throw shifter(links please) |
axialflow.com for short shifter... and i reccomend searching a bit because your thread gives me the vibe that you just want everyone else to look up the threads for you.
Not to be a dick but you can search just as easily as we can |
|
^ahahahaha Love it....
|
Here are mine (2005 M/T), just for some thought provoking:
BHR high output ignition system, incl. GMC Yukon Delco coils and MSD cables Cobb AccessPort ECU Tuner with custom tuned MazdaManiac maps Racing Beat Gauge Pod: Oil Pressure/Temp & Coolant Temp with mechanical sensors AFE Short Shifter with Voodoo Magnum Pearl knob, laser-etched shift pattern Racing Brake Sport slotted/curved vane Rotors Hawk Performance Ceramic Pads Russell brake Speedbleeders Racing Beat Ram Intake Duct, custom mated to stock intake K&N high flow flat Air Filter, with recharge kit Clutch Pedal Reinforcement bracket - Mazsport/Race Roots Mazda Screen on AC Condenser and Racing Beat screens on Oil Coolers Oil Catch Can with Breather Filter Fumoto brass ball valve oil pan drain Aldehyde high filtration Cabin Air Filter Clear side corners with Stealth bulbs Rotary Stainless Accents fore and aft bumpers McGard Spline drive lug nuts Enkei RP03 18x9.5 +38 Rims/TPMS & 265x35 BF Goodrich g-Force T-A KDW2 Tires |
Originally Posted by Huey52
(Post 3592301)
Here are mine (2005 M/T), just for some thought provoking:
BHR high output ignition system, incl. GMC Yukon Delco coils and MSD cables Cobb AccessPort ECU Tuner with custom tuned MazdaManiac maps Racing Beat Gauge Pod: Oil Pressure/Temp & Coolant Temp with mechanical sensors AFE Short Shifter with Voodoo Magnum Pearl knob, laser-etched shift pattern Racing Brake Sport slotted/curved vane Rotors Hawk Performance Ceramic Pads Russell brake Speedbleeders Racing Beat Ram Intake Duct, custom mated to stock intake K&N high flow flat Air Filter, with recharge kit Clutch Pedal Reinforcement bracket - Mazsport/Race Roots Mazda Screen on AC Condenser and Racing Beat screens on Oil Coolers Oil Catch Can with Breather Filter Fumoto brass ball valve oil pan drain Aldehyde high filtration Cabin Air Filter Clear side corners with Stealth bulbs Rotary Stainless Accents fore and aft bumpers McGard Spline drive lug nuts Enkei RP03 18x9.5 +38 Rims/TPMS & 265x35 BF Goodrich g-Force T-A KDW2 Tires |
Originally Posted by Kaiser bun
(Post 3591772)
axialflow.com for short shifter... and i reccomend searching a bit because your thread gives me the vibe that you just want everyone else to look up the threads for you.
Not to be a dick but you can search just as easily as we can |
Originally Posted by ggavgg
(Post 3592336)
@kaiser bun. hey wasup bro. i jus want to people to refer me to web sites they've been thru so that i dont go out buy somthing from a chinese based scam websites.. not tryin to be lazy ..lol.. but yea. i have money to spend but not enough to get scammed over n be able to buy more. if u no what i mean.
Ken |
And just visit the vendor section of our forums too. Please support them as much as you can. Without them we could be buying random stuff on ebay.
|
I can't say as I've never dyno'd it, but the CobbAP with MM tune, supported by the BHR ignition made a noticeable "butt dyno" improvement.
The AFE short shifter made a nice man-machine interface improvement as well. So, if nothing else I would heartily recommend those three mod's. The stock brakes/rotors are actually quite good but I wanted better aesthetics and also low noise/dust. The stock intake and exhaust are also quite good so modding those is more 'ear of the beholder' than anything else.
Originally Posted by ggavgg
(Post 3592334)
@Huey52. i have 19x8.5 fronts and 19x10s in the back .. carbon fiber hood .after market front bumper..and i have brembos coming in.. .. i was wondering how much hp u pushing at the wheels or a guestimate of hp to the crank..
|
the only mod you need for your car is the driver
Cuz he can't Search. |
Originally Posted by nycgps
(Post 3593338)
the only mod you need for your car is the driver
Cuz he can't Search. |
| All times are GMT -5. The time now is 08:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands