:beerchug:
:djcelebra

having given you up for dead, I was going to ask you to sell me the transmission kit :suspect:
.

Hahah yea... it's been brutal getting things i need to get the engine together. Rotating assembly was at a machine shop adjusting the balance for like 2~3 years. It took them over a year from the time the work was done to just put it in a crate and ship it back, and we were harassing them weekly. It's been an adventure for sure. I'd like to have it running for DGRR, but that will be difficult. Not impossible, but difficult.I dont know if I can get a fabricator in time. That's more my concern. I'll keep posting things as i have info etc. Should move a lot faster soon.

Nice build! Those rotors look nice, lightened and side clearance. Does the crossmember move the steering rack or is it just to mount the 20b?

Maybe this will actually get done hahahaha car goes to the fabricator in 3 weeks.

Just got a Bosch 82mm DBW throttle body with 20b adapter and 90mm inlet from Pac Performance.
Coils and custom resonator coming from BHR.
Rear diff hard mount from LS1RX8.
Haltech R3 and 3 wide bands. Shawn wants to run these instead of a wide band and 3 EGT sensors. Whatever makes it simpler... it's just NA.

I'm stressing getting this wiring done in time, and hoping that the engine is ready at the expected time... guess we'll see.... I'll try to keep everyone posted.

Any specifics you can share on the custom BHR resonator? Is it larger than the typical 3"?

Special ordered one off 3.5" version. Just the resonator though. We'll make our own mid pipe.

just make your own up to 4” size and to the length/position you want

https://www.spiralturbobaffles.com



who was doing that engine work to take that long?
.

It's been several issues, and multiple shops. Chip balance was off, and it took 2 years to get the rotating assembly back from the person that fixed it. That was frustrating. Lots of little things like that where each person has taken way longer than it should have. At least it's finally getting done.

Engine stacked! Picking it up this weekend.

​​​​​​
https://cimg1.ibsrv.net/gimg/www.rx8...6074f7c5b.jpeg

I assume it won’t make it to DGRR, though would love to hear that’s the wrong assumption.

We're going to try... but 2 weeks is cutting it close. If it does make it, it may not look pretty yet :yelrotflm

Hopefully you can pull it off, even if it's not pretty yet.

At this point I'm pretty sure I'll be in the MR2. It'll be there next year!

Engine is dropped off at the fabricator to get the transmission mount, exhaust, and a few more things done. Should be running in April.

even that’s a stretch, 2 weeks would be delusional

not to be negative, but understanding the amount of work involved in a swap like this that goes beyond it simply running.
.

It'll be done when it's done. At least I have the motor. :D: