exhaust came in today!! can't wait to install it. thanks Brice!
|
vids asap
|
very interested in this! depending on how it sound i'll more than likely get it
exhaust came in today!! can't wait to install it. thanks Brice! |
Hey Brice, my exhaust did not come with hardware or gaskets.
|
You will reuse the oem donut gasket and there was an enclosed exhaust clamp.
Be sure to check the entire box, I know packing peanuts are prone to swallowing small pieces. |
I also believe I enclosed new bolts for the midpipe in the midpipe box since that was shipped separately.
|
There was no packing peanuts in the midpipe box. I couldn't find the exhaust clamp so i had to go to my local shop to pick one up.
|
I'm sorry for your troubles everest and I hate to sound inconsiderate but I wan a video right MEOW lol. I hope you and brice work things out
|
i will post a video once, i get the correct bolts for the midpipe. just for some info, i get rasps with the dual res midpipe with rr dual exit exhaust from 3.5k to 4.5k. at idle and cruising speeds u cant really hear the exhaust. once u put ur foot down, it is sooooo loud lol. i been setting off alarms, so far.
|
Clamp was in the big box, not the midpipe box.
|
It's fine Brice, all I need to do now is get the correct midpipe bolts. I'll check again if the bolts were supplied in the box. If not, is there anything you can do for me?
|
If you came up with an exhaust hanger especially made to specific length for S2's that you could throw in for a few extra $, you would probably sell quite a few of these since there is a LOT of interest in an out-of-the box bolt-on catback that is decent and affordable. Just a thought.
|
unfortunately hangars aren't the only issue when it comes to S2 exhausts. The location of the axle back flange/joint becomes a problem when trying to fit an S1 exhaust on.
|
Well then, Brice needs to come up with an S2 version LOL. I think more than a few people would be interested in it.
|
I agree, I am using the TXS with extended hangars and although it seats beautifully, the flange in the axle back is maybe 3 inches off the ground lol .... luckily it is literally under the diff so I only scrape on major dips in road grade.
|
Originally Posted by Everest^
(Post 4309813)
It's fine Brice, all I need to do now is get the correct midpipe bolts. I'll check again if the bolts were supplied in the box. If not, is there anything you can do for me?
Of course the bolts should only be $2-$3 for everything happy to compensate you if you cannot find them.
Originally Posted by brilliantblackrx8
(Post 4310034)
If you came up with an exhaust hanger especially made to specific length for S2's that you could throw in for a few extra $, you would probably sell quite a few of these since there is a LOT of interest in an out-of-the box bolt-on catback that is decent and affordable. Just a thought.
It is something fairly easily sourced if the S2 user does purchase the exhaust. Liability and risk associated saying it will work without issue is not worth it, the end user just needs to be aware it can work but there are potential issues. |
Someone post a vid up! oh and brice hows the sound compared to the Agency power and how much would it be to 06810. its between this with a DR midpipe or the new version of the TXS with DR midpipe. just need to see how yours sounds
|
|
sounds good.
|
thanks!
|
Aw, now I really want one! :mad:
|
I'm loving the exhaust! Hopefully it will last a very long time =)
|
more vids more vids
|
Originally Posted by Rotor Gunnin' it
(Post 4311640)
Someone post a vid up! oh and brice hows the sound compared to the Agency power and how much would it be to 06810. its between this with a DR midpipe or the new version of the TXS with DR midpipe. just need to see how yours sounds
Free shipping for orders over $200 :)
Originally Posted by Everest^
(Post 4312323)
|
|
All times are GMT -5. The time now is 10:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands