Order List for Custom Genuine Leather Shift Boots.
 

This is the Offical Order list for my genuine leather shift boots made from Italian calfskin, for both the Illuminated Shift Knob and the Regular Shift Knobs.

Price is $39.00 + $4.05 for shipping for a total of $43.05
International Shipping is $7.00 flat.

These are fully customizable to your little hearts content.

Just to name some possibilities:

Black Leather with White Stitching, Red Stitching, Yellow Stitching, Blue Stitching, Tan Stitching (to match your Chaparral inserts), etc......

You not limited to Black Leather, you can have any combination of;
Black, Charcoal, Medium gray, Light gray, Cream, Tan, Sierra, Beige, Brown, Red, Burgundy, Orange, Medium blue, Violety blue, Dark blue, White, or Light yellow Leather. With any color stitching too! (see color sheet attached)

You only limited by why you can come up with, I can even do you 2 color tone boots such as the Black/Charcoal one attached below.
As a note Black leather and White Stitching words really well on the illuminated shift knob because the knobs stitching is white.

I will eventually carry these instock however with so many choices it would be foolish of me to try and cover every combination not knowing what you guys would want.
NO LONGER A GROUP BUY, YOU MAY PLACE A SINGLE ORDER DIRECTLY THOUGH ME INDEFINITELY.
Payment Page
http://www.polakgraphics.com/index2...shiftboots.html
SPECIFY knob type.

Post information into paypals optional instructions.

NO LONGER A GROUP BUY, YOU MAY PLACE A SINGLE ORDER DIRECTLY THOUGH ME INDEFINITELY (POLAK).

1.Dannobre...black with white stitching...RP shifter with regular knob.

1.Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ Black stitching- Regular knob.

1.Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ White stitching- Regular knob.
3.Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter

1. Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ White stitching- Regular knob.
3. Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter
4. Nemesis8 - 1qty- Black w/ White stitching- Regular knob.

does the tan match the chaparal exactly?

Nice!
 

1. Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ Black stitching- Regular knob.
3. Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter
4. Nemesis8 - 1qty- Black w/ White stitching- Regular knob.
5. Taka - 1 qty - black w/ red stitching - RP shifter with regular knob

If the mazdaspeed knob can go with the stock boot it can go with this one dimensionally they are the same.

I thought so too.... silly me that I asked :o

What im going to do for the Chaparal color is get a sample and match it exactly to that color, you don't happen to have a piece from some part you uninstallled do you? How bout you Modena? Although the tan is pretty close, I want it pefect too.

Is this the same as Redline Goods leather shift boot? I have that and its excellent.

Yup, its made by the same quality people, Redline Goods' owner is actually a polak himself, company is located in warsaw, so he hooked me up.

There is one minor difference in that the Illuminated knobs slit isn't cut down as far as his were, that way you can't see the insulation when the leather folds. O and they are less expensive ;)

what about the blue... none of the blues seem to match the exterior blue....

I wonder what a black/yellow one would look like?

Polak, not sure if it matters, but I edited my order (see above post). I had black with white stitching due to a previous post stating the shift knob had white. The only thing is my shift know has black stitching, so anyway I changed my order to Black/Black.

Damn that was a lot of rambling.

Ok put it this way I can match any color as long as I have a sample, the blues I can manage because the vinyl I use for the Rx8club.com decals is nearly identical, I'll defiantly get a piece of chaparral leather someway if no one can assist before all 25 are filled.

I hope you don't mean matching the exterior blue including the metallic because that would look cheesy as hell..........

Hummm if Mazda had done yellow seat inserts like in the prototype then I would say great, personally I would go with something a little more mild black with yellow stitching perhaps, but hell what do i know.
FYI international shipping is dropped to $7.00.

Easter present??? Thx Mark.

I think to match colour of the interior is more important than the exterior. It is very out of place if you have a yellow leather boots under a black gear knob. Yellow stitching is enough.

I even think it is gay to have black/red leather combo to match my black/red leather interior. So I just go for black with red stitching.

Mark, is the one with red stitching (on your pics) having a charcoal leather? or black leather? look charcoal to me cf. the one with illuminated knob.

NO LONGER A GROUP BUY, YOU MAY PLACE A SINGLE ORDER DIRECTLY THOUGH ME INDEFINITELY (POLAK).

1. Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ Black stitching- Regular knob.
3. Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter
4. Nemesis8 - 1qty- Black w/ White stitching- Regular knob.
5. Taka - 1 qty - black w/ red stitching - RP shifter with regular knob

1. Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ Black stitching- Regular knob.
3. Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter
4. Nemesis8 - 1qty- Black w/ White stitching- Regular knob.
5. Taka - 1 qty - black w/ red stitching - RP shifter with regular knob
6. Ammachama - 1qty - Black with white stitching - regular knob

Thats just because I was using a flash i'll take some daylight pics tomorrow.

o i can't stand waiting get 4 more and I'll fill the first 10

1. Dannobre...black with white stitching...RP shifter with regular knob.
2. Cam - 1qty- Black w/ Black stitching- Regular knob.
3. Modena...3sides tan, front side facing radio black, black stitching, RP Illuminated Shifter
4. Nemesis8 - 1qty- Black w/ White stitching- Regular knob.
5. Taka - 1 qty - black w/ red stitching - RP shifter with regular knob
6. Ammachama - 1qty - Black with white stitching - regular knob
7. 05RX-8 - 1 qty - Red w/ Black stitching - regular knob

I KNEW someone will do that! If I have a red knob, red console cover and red handbrake, I will definitely go for that! Nice choice, will look great. I am just a bit boring. ;)

i got red f&r console and red handbrake, so if i dont get "red shift boot", i'll be a "gay lo", ok taka? lol