Originally Posted by dondo
(Post 2996473)
which one did you sign up for??
do it man! I signed up for the SCCA event this Sunday May 3rd in Packwood. Normally the SCCA events are in Bremerton, but they'll hold a couple events in Packwood, I guess to change it up. I'm excited to try AutoX in a different setting. Got to: http://www.nwr-scca.org/solo/ Hope to see you all there and hopefully without needing rain gear |
Originally Posted by TANKERG
(Post 2997064)
I signed up for the SCCA event this Sunday May 3rd in Packwood. Normally the SCCA events are in Bremerton, but they'll hold a couple events in Packwood, I guess to change it up. I'm excited to try AutoX in a different setting. Got to:
http://www.nwr-scca.org/solo/ Hope to see you all there and hopefully without needing rain gear |
Originally Posted by RawrX8
(Post 2997042)
Not to spend $1000 on tires every other AutoX.
|
Originally Posted by dondo
(Post 2997127)
ahh, this sunday i cant make it. have fun though!
Thanks. There's also another SCCA in Packwood on the 17th and one in Bremerton on the 24th of May. |
Originally Posted by TANKERG
(Post 2997064)
I signed up for the SCCA event this Sunday May 3rd in Packwood. Normally the SCCA events are in Bremerton, but they'll hold a couple events in Packwood, I guess to change it up. I'm excited to try AutoX in a different setting. Got to:
http://www.nwr-scca.org/solo/ Hope to see you all there and hopefully without needing rain gear |
Great I'll see you there. I wish I can race in the morning. The next event on the 17th, B Stock is in the morning so I'll be able to race then and TO in the PM. (That will be if I can get the day off from work.)
|
Working on uploading pictures/videos now but holy crap! Packwood >>>>> Bremerton! 5 runs in the morning, 4 in the afternoon and it's a longer, faster course.
|
I just got back from the event in Packwood. That is a cool place for autox. It's in a huge empty lot and it's almost like a mini road course. There is another SCCA event there in two weeks on the 17th. If you can make it I really recommend it. The AM got 5 runs and the PM only 4. It turned out to be great weather.
I got magnetic numbers for my car for this event (though I didn't get the speed increase I was hoping to get from them(I came in last in my class)) I got them from soloracer.com It took two weeks from the time I ordered for them to get here. |
Alright, so all of my pictures are here: http://pics.dpsubs.org/Packwood_5-3-2009/
So highlights from the day: -9 Runs for the day -A State trooper rode with a vette in the morning. He told the vette driver he was going too slow. -5 RX-8's! -WTF the pass that's fastest to get there is still closed for snow. -The pit is inside a warehouse -#1 Reason Packwood sucks: http://www.youtube.com/watch?v=u__ojyIBc_A Yah he's absurdly fast: http://pics.dpsubs.org/Packwood_5-3-...s/dscn0711.jpg Full morning grid. That's both groups: http://pics.dpsubs.org/Packwood_5-3-...s/dscn0715.jpg This guy wins... Yes, that's a roll bar an yes, his interior is stripped http://pics.dpsubs.org/Packwood_5-3-...s/dscn0718.jpg Don't fuck with the local PD: http://pics.dpsubs.org/Packwood_5-3-...s/dscn0722.jpg |
Originally Posted by Anijo
(Post 3001953)
-WTF the pass that's fastest to get there is still closed for snow.
HAHA did you make it up to the barrier too? I was just about to put it in four wheel drive too and then BAM!! Road Closed |
Is anyone interested in ProSolo? http://www.nwr-scca.org/solo/ProRules.htm
The guy with the white GTR hit me up in email at work today about it. They setup 2 parallel courses that mirror each other and 2 cars race side by side from a drag tree start. You get 4 runs on each side. Scoring is based on PAX Indexed times, so they're scaled to allow competition between all cars. They all take place at Packwood and the first one is in 2 weeks, on Saturday the 16th. These are the events that are scored tournament style that lead to the national events. Seems like a good way to get an erectile disfunction though... doing a drag start next to that Exige on R-comps or something... Still, it sounds like it could be really cool, especially if we got a group to go and get paired up... |
Originally Posted by Anijo
(Post 3002704)
Is anyone interested in ProSolo? http://www.nwr-scca.org/solo/ProRules.htm
The guy with the white GTR hit me up in email at work today about it. They setup 2 parallel courses that mirror each other and 2 cars race side by side from a drag tree start. You get 4 runs on each side. Scoring is based on PAX Indexed times, so they're scaled to allow competition between all cars. They all take place at Packwood and the first one is in 2 weeks, on Saturday the 16th. These are the events that are scored tournament style that lead to the national events. Seems like a good way to get an erectile disfunction though... doing a drag start next to that Exige on R-comps or something... Still, it sounds like it could be really cool, especially if we got a group to go and get paired up... |
Originally Posted by dondo
(Post 3002744)
interested but that day is no good. know anything else like that coming up though? more lapping days maybe?
Not much else going on until Memorial Day weekend, when there's a ton of stuff. |
Originally Posted by Anijo
(Post 3002833)
There's another SCCA autocross event at Packwood the next day, on the 17th. I'm tempted to try and do both days... but that would be an expensive weekend, like $150 in gas and entry fees alone. I'm at the end of my weekend memberships counting towards the full membership too, I might need to break down and get an SCCA membership...
Not much else going on until Memorial Day weekend, when there's a ton of stuff. |
We's been kicked out of Stock class. And by we I really mean Brad and I, CAI's kick you out along with a bunch of other stuff. But Chris was right, changing the wheel size kicks you out of stock: http://cms.scca.com/documents/Solo_R...Solo_Rules.pdf [This fucker is 346 pages, btw]
Originally Posted by SCCA Rules
13.4 WHEELS
Any type wheel may be used provided it complies with the following: it is the same width and diameter as standard, and as installed (including wheel spacers if applicable) it does not have an offset more than +/- 0.25 inch from a standard wheel for the car. The resultant change in track dimensions is allowed. Front Sway bars can be modified/replaced in any way however rear sway bars can't be touched. At all. Turns out though that the ignition coils are allowed in Stock:
Originally Posted by SCCA Rules
13.9 ELECTRICAL SYSTEM
A. The make of spark plugs, points, ignition coil and high tension wires is unrestricted including spark plug wires having an in-line capacitor. B. On cars made prior to January 1, 1968, any ignition system using a standard distributor without modification may be used. C. Ignition settings may not be adjusted outside factory specifications. D. No changes are permitted to electronic engine management systems or their programming. E. Additional battery hold-down
Originally Posted by SCCA Rules
14.3 TIRES
Tires must meet the eligibility requirements of the Stock category (excluding 13.3.F), with the following additional restrictions: 71 A. Tires may have section widths up to and including the following: ST, STS – 225 mm STX (AWD), STU (AWD) – 245 mm STX (2WD) – 265 mm STU (2WD). – 285 mm B. Tires must have a minimum tread wear rating of 140. C. Tire models must not appear on the following list, which may be altered at any time by the SEB upon notification of the membership. Pirelli P Zero Corsa 14.4 WHEELS A. Any wheels are allowed with widths up to the following: ST, STS – 7.5" STX (AWD) – 8" STX (2WD) – 9" STU - unlimited |
Originally Posted by Anijo
(Post 3012870)
Fully adjustable coil overs are allowed too... but only if you remove all but 2 of the adjustment knobs.
Originally Posted by Anijo
(Post 3012870)
Turns out though that the ignition coils are allowed in Stock:
If any of you guys need help figuring out what class you can run let me know all the mods you've done, even the small ones that you don't think would make a difference. And I'll help you figure out what class or classes you fit into. I see you guys found the ProSolo next weekend. There's two regional prosolo's and one national prosolo events this year. Both the regional events are on the Saturday before an autoX event. The national prosolo event is a two day event. I didn't do any of the prosolo's last year, but I did one regional and the national one two years ago. They are fun and worth experiencing, personally I'd rather either go drag racing or autoxing. But as of right know I do plan on going this Saturday, I'll be there for sure Sunday. |
Originally Posted by Arrrrex-8
(Post 3013147)
Coil overs are not allowed in stock. Shocks only, springs also must be stock, no alternate springs of any form. In addition to only having two adjustment knobs. They must be +/- 1 inch in length, the spring perch must be stock or same size and shape, and the spring perch must be located at the same location relative to the lower shock mount, meaning no ride height changes allowed.
Originally Posted by Arrrrex-8
(Post 3013147)
The coils maybe legal but I don't think the bracket and plug and play harness are. The way the rules are written is unless it says you can do it you can't. And you cant do an illegal mod in order to do a legal mod. This should remove all gray area's but it doesn't because different people interpret things differently. And there are ways to deal with this, you can write to the rules comity for clarification or you can protest some one at an event, however I've never seen a protest at a local event in the 5-6 years I've been doing this, but they do happen from time to time at national events. There are no provisions for the mounting bracket or wire harness, your only hope would that these would be considered part of the coils but I'm pretty sure they wouldn't be. If the coils mounted to the factory mount and plugged directly into the factory harness it wouldn't be an issue.
If any of you guys need help figuring out what class you can run let me know all the mods you've done, even the small ones that you don't think would make a difference. And I'll help you figure out what class or classes you fit into.
Originally Posted by Arrrrex-8
(Post 3013147)
I see you guys found the ProSolo next weekend. There's two regional prosolo's and one national prosolo events this year. Both the regional events are on the Saturday before an autoX event. The national prosolo event is a two day event. I didn't do any of the prosolo's last year, but I did one regional and the national one two years ago. They are fun and worth experiencing, personally I'd rather either go drag racing or autoxing. But as of right know I do plan on going this Saturday, I'll be there for sure Sunday.
I definitely want to go Sunday but I'm still a little torn on Saturday... but I'm leaning towards doing both days. I'm tempted to stay out there Saturday night but there doesn't really seem like ANYTHING to do out there. |
Originally Posted by Anijo
(Post 3012870)
We's been kicked out of Stock class. And by we I really mean Brad and I, CAI's kick you out along with a bunch of other stuff. :
What's a CAI?? "My car now sports cone marks, nay, Battle Scars!" : Well now my car sports curb scars :( I need to go have the concrete removed from the bead and the rim. Hopefully there isn't any damage to the tire. I was having fun and took a right hand turn too tight and kissed the curb pretty good. |
^uh oh. pics?
|
Originally Posted by TANKERG
(Post 3014238)
What's a CAI??
Did you get a chance to look under Mike's hood at Packwood?... I'm with Brad, we need to start prefacing people's names with the color of their car (Black Sean, Red Sean, Black Mike, Silver Mike).
Originally Posted by TANKERG
(Post 3014238)
Well now my car sports curb scars :( I need to go have the concrete removed from the bead and the rim. Hopefully there isn't any damage to the tire. I was having fun and took a right hand turn too tight and kissed the curb pretty good.
|
Originally Posted by Anijo
(Post 3014632)
Cold Air Intake
Did you get a chance to look under Mike's hood at Packwood?... I'm with Brad, we need to start prefacing people's names with the color of their car (Black Sean, Red Sean, Black Mike, Silver Mike). |
Originally Posted by dondo
(Post 3014660)
that's why we have these rx8club usernames man. you'll always be anijo to me. ;)
And to be fair, you're Mike (Dondo) in my phone, but it's just akward when talking in person. |
Originally Posted by Anijo
(Post 3014741)
I'll be honest, that sounded a little ghey.
And to be fair, you're Mike (Dondo) in my phone, but it's just akward when talking in person. |
Originally Posted by Anijo
(Post 3014632)
Cold Air Intake
Did you get a chance to look under Mike's hood at Packwood I did thanks.
Originally Posted by Anijo
(Post 3014632)
You should've seen my stock wheels. A minivan ran me into a curb at 30mph the 3rd or 4th week I had the car. And then there was the time I got stuck up against a curb during the Snowpacalypse... I'm wicked paranoid about keeping my RPF1's clean though. I was taking the turns wide in the garage under Lincoln Center last weekend and my friend in the car said something like "You drive funny" and I had to explain I didn't want my rims anywhere near the concrete curbs around the turns there...
Mine was pure stupidity. I wanted to take the turn hard and close and I turned a second too soon @ 40MPH. :lol: - :banghead: in 0.5 seconds Front https://www.rx8club.com/picture.php?...pictureid=6683 https://www.rx8club.com/picture.php?...pictureid=6684 Rear https://www.rx8club.com/picture.php?...pictureid=6685 https://www.rx8club.com/picture.php?...pictureid=6686 Discount Tire fixed the tires for free and they didn't see any damage. I then took it and had an alignment done, No damage, but it was off just a little. More than a 2 second penalty haha Got lucky this time. |
I was about to say ill sell you my stockers. $500 :lol2:
|
All times are GMT -5. The time now is 01:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands