RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Non-Rotary Swaps (https://www.rx8club.com/non-rotary-swaps-196/)
-   -   Frankenstein Fun Thread Let it all Rip! (https://www.rx8club.com/non-rotary-swaps-196/frankenstein-fun-thread-let-all-rip-256192/)

Gravey 02-27-2015 08:02 AM


Originally Posted by Chezmanbespoke (Post 4667655)
Yea 20+% off income and another 13% when you want to spend what they didnt take off your check. :mad:

Harpers hands are deeeeep into our pockets. Dick.

Tax it before you get it, then tax it again when you spend it! WIN/WIN!!!!!

9krpmrx8 02-27-2015 09:08 AM

"F#!k engineering, I got this" - Joker_andthe_Thief

Legot 02-27-2015 11:54 AM


Originally Posted by Joker_andthe_thief (Post 4667710)
the auto fly wheel accommodates the 1jzgte starter the manual flywheel spacer moves the manual flywheel closer onto the spline shaft so it's the only way to make them work together

Why not just make a new double thick aluminum flywheel with a steel toothed ring on the outside? It would be more expensive, but it would weigh less and cut your legs off less violently.

logalinipoo 02-27-2015 11:56 AM

There you go more expensive and safer are not his style. He'd rather save build money to bribe people year after year.

200.mph 02-27-2015 11:58 AM


Originally Posted by Legot (Post 4667845)
Why not just make a new double thick aluminum flywheel with a steel toothed ring on the outside? It would be more expensive, but it would weigh less and cut your legs off less violently.


Originally Posted by logalinipoo (Post 4667847)
There you go more expensive and safer are not his style. He'd rather save build money to bribe people year after year.

do you even double flywheel bros?

Gravey 02-27-2015 12:02 PM

^LMAO epically well-played!!!

WaitingforFI 02-27-2015 12:10 PM

https://cimg8.ibsrv.net/gimg/www.rx8...84cb8445bf.jpg

Gravey 02-27-2015 12:11 PM

^So you can Flywheel while you Flywheel!

blackenedwings 02-27-2015 12:18 PM

This build has actually become more clownshoes retarded than the Isuzu swap. Congratulations.

A 206 bhp 1JZ with two giant flywheels in a hacked up RX-8 getting bribed past inspection is goddamn hilarious.

WaitingforFI 02-27-2015 12:26 PM


Originally Posted by blackenedwings (Post 4667871)
This build has actually become more clownshoes retarded than the Isuzu swap. Congratulations.

A 206 bhp 1JZ with two giant flywheels in a hacked up RX-8 getting bribed past inspection is goddamn hilarious.

Im not sure if it's hilarious or just scary. No way would I want to be on the road anywhere near that time bomb.

Gravey 02-27-2015 12:31 PM

:uhh:

RIWWP 02-27-2015 12:33 PM

Fortunately, most of us don't live in Canada.

Sorry Gravey. Don't take your R3 out. Better send it down to me to keep safe from him.

Gravey 02-27-2015 12:36 PM

^Yeah, don't forget to push the mileage rollback-speed regulator button, or else you might go too fast, and put too many miles on it.


".... These sure do ride nice! This doesn't even feel like 60mph...."

RIWWP 02-27-2015 12:46 PM

I swear i won't put your kilometers on it, just miles.

CRO8TIA 02-27-2015 01:13 PM

"hey so i am running the automatic fly wheel with a custom made 15mm hubcentric 8 bolt spacer then the 1jzgte manual flywheel fastened with NEW 10.9 grade steel hex cap bolts sealed with blue loctite 243 and torqued to 65ftlbs"
I have seen that method used successfully many times, my concern is the 1jzgte flywheel is not centralised on the crankshaft,you are relying on the bolts to maintain its position.You need a hub/adapter from crankshaft to at least level with the clutch side of the flywheel mounting surface.I did mention this in a much earlier post.

hoosier1104 02-27-2015 03:24 PM

Wow!!!!! What some people will do to "go fast" just blows my mind. Anything other than a roatary in a RX of any nature is just an abortion. RX = rotary not pistons. Silly people.

Joker_andthe_thief 02-27-2015 03:29 PM


Originally Posted by 9krpmrx8 (Post 4667764)
"F#!k engineering, I got this" - Joker_andthe_Thief

F#!k YEA go hard or go home ;)

Joker_andthe_thief 02-27-2015 03:37 PM


Originally Posted by blackenedwings (Post 4667871)
This build has actually become more clownshoes retarded than the Isuzu swap. Congratulations.

A 206 bhp 1JZ with two giant flywheels in a hacked up RX-8 getting bribed past inspection is goddamn hilarious.




its actually 205kw for the 1jz-gte twin turbo first gen

the 1jz-ge non turbo is around 170kw

but the car will be on the road in 3 or so months and i will post up a video and a photo of the dyno read out or a nice video of the giant mass of flywheels tearing threw my tranny tunnel ;)

hoosier1104 02-27-2015 03:39 PM

I will believe that when my shit turns purple and smells like rainbow sherbet.

Joker_andthe_thief 02-27-2015 03:42 PM


Originally Posted by CRO8TIA (Post 4667889)
"hey so i am running the automatic fly wheel with a custom made 15mm hubcentric 8 bolt spacer then the 1jzgte manual flywheel fastened with NEW 10.9 grade steel hex cap bolts sealed with blue loctite 243 and torqued to 65ftlbs"
I have seen that method used successfully many times, my concern is the 1jzgte flywheel is not centralised on the crankshaft,you are relying on the bolts to maintain its position.You need a hub/adapter from crankshaft to at least level with the clutch side of the flywheel mounting surface.I did mention this in a much earlier post.



well thats the whole point to get it on the road for as cheap as possible for spring and then as parts break find out why they broke machine new parts stronger slightly modify the design and then get it reliable lol enginer



https://cimg8.ibsrv.net/gimg/www.rx8...1962681f4d.jpg

Joker_andthe_thief 02-27-2015 03:44 PM


Originally Posted by hoosier1104 (Post 4667938)
I will believe that when my shit turns purple and smells like rainbow sherbet.

your just dumb for thinking a rotary motor is worth more than a quarter sack of potatoes

hoosier1104 02-27-2015 03:46 PM

Or you could do it right the first time and not have to replace parts. Just saying. Do it right the first time so you do not have to redo it later.

RIWWP 02-27-2015 03:48 PM

If you can't afford to do it right the first time, when can you afford to do it over?

Those 'fixes' count for the total swap cost by the way... It won't be a cheap swap, which is what we have been saying all along.

hoosier1104 02-27-2015 03:49 PM


Originally Posted by Joker_andthe_thief (Post 4667940)
your just dumb for thinking a rotary motor is worth more than a quarter sack of potatoes

I am not the jackass throwing shit together just to make it work either. Who is the ass clown now?

I am a purist at heart. I know the rotary has it weakness but I work with them to make it strong.

Joker_andthe_thief 02-27-2015 03:53 PM


Originally Posted by hoosier1104 (Post 4667945)
I am not the jackass throwing shit together just to make it work either. Who is the ass clown now?

I am a purist at heart. I know the rotary has it weakness but I work with them to make it strong.



'ey purist i think i saw some women earlier doing math you should warm up the stake;) god forbid people try to help bring the cavemen into the future, the future that is piston


All times are GMT -5. The time now is 06:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands