Engine swap thread..
 

Hey all, first post, so be gentle..

First, I'm just curious as to why it's so difficult to swap different motors into this car? I know I know, the rotary is part of what this car is about. I know.

Now, I do know most of it is because of the available room in the bay, but it shouldn't be a big deal to get most 4cyls in there, should it? I'm not talking a big LS v8, just a little 4 banger..

Specifically one of these:
v4 Katech | Katech Inc.
MOTUS MOTORCYCLES - The MST V4 Sport Tourer
Is the Motus V4 Baby Block Crate Engine the Future of Old School Hot Rodding?

Now, as per the last link "the price is $10,220 which includes the ECU, ride by wire intake, engine harness and fuse box" so you wouldn't need TOO MUCH more for the swap in the way of parts.. But for those that don't know about this motor, it's basically a Chevy ls motor cut in half and downsized. Designed for motorcycles, but it will be sold as a crate engine and they are encouraging you to put it into anything and everything. It was also designed to be a hot rodders "clean slate" highly moddable, and it's capable of big numbers..

What would you think of something like this bored out to 2.0l or more, with a mild cam regrind, possibly even a roots blower, dropped into an rx8?
Do you think the swap itself would be difficult? The motor itself is less than 200lbs, and it's small and compact because of its pushrod design. It might even be smaller in demention than the rotary... So lets hear it guys, thoughts, feelings, opinions?

my opinion is that it's not a Tech Garage area subject ...

Sorry, I saw other engine swap topics here and thought this would be the best place for it. Mods feel free to move it..

We are planning on having a engine swap forum in the future. Once it is setup, all non-rotary power swaps will be moved there.

I have the same opinion of those threads :) and please note that I was only stating it as FYI, no judgement was made or intended

it would generally be a Major HP forum area topic since nearly anything is more powerful than the average low compression Renesis :rofl:

i think putting the engine swaps in one place is a great idea, as the threads can get made, and you never have to see them...

the Rx8 is hard because the ECU is on a network with a bunch of other stuff in the car, so putting another engine in, physically isn't the hard part, its things like getting the tach to work, as the gauge cluster is on a canbus with the stock ecu...

That's interesting... So it's more difficult on the electrical side of things, hmmm...

ive always liked RB26 engines myself. & dreamed of one in a Rx7
But being a new owner of a rx8 and learning about the rotary.
I would probably love an rb26 in it. But than again i can probably make same power with same MPG with the rotary for less $$.

To much fab work & shit. Moving steering rack~ everythings custom made~ than u need a $2000 ECU
Than u wont pass emission worth shit ~
Air condition and cruise controls out the window ~
And than u look at your bank account and its out $15,000 after it all.
SO i think a turbo kit down the road for a 13B is swell~

Plus u get the sick rotary sound & backfires :D. Not to mention your dad mindblown on the hole rotary shit.

The swaps where those things are discussed are mostly all in the Major HP Modifications area

current thread?
 

any current threads on swaps? im starting a v6 swap

Sorry to hear that.
Go to the home page and look for the Frankenstein thread.

Id imagine the main issue would be the engine mounts? You would have to fabricate every single one, and be sure that theyre strong enough to hold what ever engine your dropping in

ive done v8 chevette"s v8 monza, i like the mazda but at 75 k the motor is junk i bought the car for 900 so not like im destroying a good car its ruff on the outside, i did drive it, cool little car no compression, wont start when warm, or idle, fab is no problem, we have a iron worker and press brake at work my problem is i was wondering if anyone has found a good rack conversion for the eps? i acctually could clear the eps with this combo but would like some more clearance and ive heared about troubles with the eps anyway, i dont want to throw just any rack in there that fits and end up with bumb steer problems,the ls1 swap looks cool but i dond want to screw up the balance of the car the v6 sits entirly behind the centerline of the front spindles

Swaps are easy, and the electrical wiring is also easy... :)

Show me your ways!! O.o

I can show you no such things...:yelrotflm only the priveleged... :bj: hahahahahahahaha

Nope not at all, it's pretty funny though!