Slave cylinder install
 

i apologize for asking about stuff in new member section, still restricted lol

anyways, based upon my finding i have fluid dripping onto firewall under assembly. i will be changing out the slave cylinder. But will i need to do anything else like a master cylinder repair kit or anything else while im messing with that?

the slave is on the transmission, the master is on the firewall.

more so was wondering if you should change both at the same time? or if there is anything else i need to be on the lookout for due to the cylinder failing

and after thiking about your post more i realized that i was confused on what cylinder i am looking for. so i need a master cylinder. glad i hadnt bought parts. still need to do some research. thanks

Check the lines on the clutch master as its fed by the brake master

http://repairguide.autozone.com/znet...3f80206a71.gif

http://www.rotaryresurrection.com/kl...p/DSCF1554.JPG

What is leaking exactly if there is fluid leaking on inside behind clutch pedal. I can post picture later. That will be fixed if I replace the cylinder?

If its leaking into the car replace the master. Don't bother with a rebuild kit, been there twice with my FD. Also bench bleed it before you install it. Should be instructions with it on bench bleeding. If not its the same s bleeding a brake master.

Perfect. Thank you